JST YC Ratchet Crimping Tool for XA Contacts

  • RS Stock No. 602-8694
  • Mfr. Part No. YC-692R
  • Manufacturer JST
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

JST YC-692R Hand Crimping Tool for SXA, SXM and SXAM Crimp Terminals

Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

JST YC-692R Hand Crimping Tool - Overview

From JST a durable, reliable and easy to use hand operated crimping tool made from high quality materials. This hand tool consists of two handles, a ratchet mechanism and a precision ground die assembly with two crimping cavities

Ratchet Mechanism

The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles will re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps

Key Features and Benefits

• Durable and easy to use
• Precision ground dies
• Ratchet mechanism ensures full crimp cycle is achieved
• Wire stop for accurate terminal positioning

Questions and Answers

What Terminals can this Crimping Tool be used with?
This hand crimping tool is designed for crimping JST SXA-001T-P0.6, SXM-001T-P0.6 and SXAM-001T-P0.6 un-insulated open barrel crimp terminals that accept a 28 AWG to 22 AWG wire size onto cable

JST Hand Crimping Tools

Specifications
Attribute Value
Series YC
Crimp Connector Type XA Contacts
Crimp Tool Type Plier
Primary Keyword Crimping Tool
1 Within 4 working day(s) (Global stock)
28 Within 6 working day(s) (Global stock)
Price Each
MYR 2,250.69
units
Per unit
1 +
MYR2,250.69
Related Products
Molex hand crimp tool will ensure you get ...
Description:
Molex hand crimp tool will ensure you get complete crimps due to its full cycle ratcheting, it has been ergonomically designed with soft handles. The crimp tool features precise designed crimping profiles and has easy contact positioning. Easy handling as ...
A universal crimp tool frame with die sets ...
Description:
A universal crimp tool frame with die sets available separately for terminating AMP and Western Electric Style data plugs.Tool frame: (stock number 443-895) A ratchet action crimp tool frame with ratchet release and finger operated set screws for rapid location ...
The YC-082 is a ratchet sytle handtool, designed ...
Description:
The YC-082 is a ratchet sytle handtool, designed specifically to crimp our loose piece SMF-01T-1.3 contact.
0.5 - 6.0 mm² 'F' Crimp Tool for ...
Description:
0.5 - 6.0 mm² 'F' Crimp Tool for use with RS range 'F' style terminals (in the wire range 0.5 to 6.0mm²) typical stock no. 488-1263.