RS PRO Bearing Puller, 2 pieces

  • RS Stock No. 434-2572
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TW
Product Details

Micro Bearing Puller

These Bearing Pullers from our own RS PRO own brand are manufactured to a very high specification and subjected to rigorous testing which is exceeding their stated capacities.

The legs and beams are drop forged from high-quality steel and then heat-treated for extra strength and durability.

What to consider when choosing a bearing puller for your job?

3 Jaw micro bearing puller
For rapid removal of bearings, pulleys, sprockets etc
Manufactured from drop-forged and hardened alloy steel
Max size of bearing/pulley etc 45mm
Arm spread 19-45mm, maximum throat depth 70mm
Securing collar tightens under puller action

When choosing the right puller for the job, consider using a 3 leg puller if possible - this will give you better load distribution and is a lot safer in use.

Spread of bearing puller? It is determined by the width of the part to be pulled.
Reach of bearing puller? It must be at least equal to or larger than the depth of the part that you need to remove.
Force of bearing puller? If you removing rusted parts or where there is a large area of surface contact, a greater force will be required. Consider choosing a puller which force screw diameter is at least half the size of the shaft on the item that you need to remove. Still not sure which puller to choose? Use the next largest simply because undersized bearing puller will slow down the job and nobody has time for that.

Features and Benefits

• 3 jaws
• Maximum size of bearing - 45mm
• Arm spread - 19 to 45mm
• Reach - 73mm
• Self-centring force screw with 'T' bar and 13mm hexagon drive
• Drop forged legs with independent leaf springs
• Securing collar tightens under load for positive, non-slip pulling action
• 1-tonne capacity
• Comes with extension point in a strong blow moulded case

Where will you need this bearing puller?

Automotive and engineering applications such as:
• Alternators
• Generators
• Domestic appliances
• Power tools and pumps

RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Supplied with

Extension point in a strong blow moulded case

Specifications
Attribute Value
Capacity 19 → 45 mm
Operation Lever Press
Number of Pieces 2
32 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 369.39
units
Per unit
1 +
MYR369.39
Related Products
A 3 piece set designed for the safe ...
Description:
A 3 piece set designed for the safe removal of tight fitting ball bearings, bearing races, bushings and shaft seals. The internal extractor is inserted into the bearing and the spindle screwed in. The turned out shoulders will press outwards ...
The SKF TMHP 10E hydraulic jaw puller kit ...
Description:
The SKF TMHP 10E hydraulic jaw puller kit allows for the effortless dismounting of bearings up to 100 kN. With self locking arms, the jaw puller minimises the risk of slipping even when under load. • Hydraulic spindle with safety ...
Introducing the series of professional Wide 2/3 Leg ...
Description:
Introducing the series of professional Wide 2/3 Leg Bearing Pullers from Facom. These compact pullers have been designed with the most demanding application in mind and made from the highest quality materials to ensure safety and high performance. A simple ...
RS Pro mechanical gear puller set for gear ...
Description:
RS Pro mechanical gear puller set for gear sizes from 9/32 in to 3in (7 → 75mm). • Damage free pulling of gears, bearings, harmonic balancers etc• IDrop forged steel construction• Heat treated with black finish.