Countersinks

Countersink cutter drill bits are designed to fit directly into manual, electric and cordless drill driver attachments and have hexagonal or round shanks. Countersink cutters are used to create a chamfer around the rim of a pilot hole enabling the head of a countersunk screw to sit flush. Countersink cutters can also be used to remove the burr left from a drilling or tapping operation.


Types of Countersink Cutters



  • Cross-Hole Countersink Cutter: These have a hole that goes through the side of the cone that provides the cutting edge. These countersink cutters are suitable for deburring and can also be used in soft materials such as wood or plastic to create a countersunk hole. The design of these countersink cutters means that they are free from mechanical vibration or 'chatter' and they also stay in the centre.

  • Fluted Countersink cutter: These have fluted blades that produce a heavy chamfer to create the correct seating for a countersunk-head screw. Countersink cutters are available with six different cutting angles but the most common are 82° and 90°. The number of flutes on the countersink cutter can also vary.

  • Single fluted: These have less chatter or mechanical vibration than multi-fluted and are ideal for use in small holes for general-purpose countersinking, chamfering and deburring. These are designed for machine use and light portable work when operating at higher speeds.

  • Three fluted: These are designed for a chatter-free performance and are used mainly in portable applications at slower speeds. The design of these countersinks gives them a good centring ability.

  • Four fluted: These have good radial relief

  • Five Fluted: These have a rugged design and the odd number of flutes minimises chatter.

  • Six fluted: These are ideal for producing fast shearing cuts.


These countersink cutter drill bits are made from HSS (High-Speed Steel) which can withstand high temperatures without losing its hardness.


...
Read more Read less

Filters

Viewing 1 - 20 of 104 products
Results per page
Description Price Drill Bit Type Head Diameter Countersink Angle Number of Flutes Material Overall Length Number of Pieces Shank Diameter Shank Length
RS Stock No. 423-816
BrandRS PRO
MYR75.59
Each
units
Countersink 12.4mm 90° 3 HSS 36 mm 1 7.15 mm 21.5mm
RS Stock No. 218-668
BrandRS PRO
MYR78.69
Each
units
Countersink 10mm 90° 3 HSS - 1 - -
RS Stock No. 215-489
BrandRS PRO
MYR93.85
Each
units
Countersink 10mm 90° - HSS 48 mm 1 8 mm 30.5mm
RS Stock No. 215-495
BrandRS PRO
MYR156.03
Each
units
Countersink 15mm 90° - HSS 65 mm 1 10 mm 37.5mm
RS Stock No. 456-905
BrandRS PRO
MYR214.38
Each
units
Countersink 25mm 90° 3 HSS 145 mm 1 - -
RS Stock No. 218-674
BrandRS PRO
MYR70.47
Each
units
Countersink 8mm 90° 3 HSS - 1 - -
RS Stock No. 215-473
BrandRS PRO
MYR65.89
Each
units
Countersink 5mm 90° - HSS 45 mm 1 6 mm 45mm
RS Stock No. 215-445
BrandRS PRO
MYR159.13
Each
units
Countersink 15mm 90° - HSS 65 mm 1 10 mm 37.5mm
RS Stock No. 218-630
BrandRS PRO
MYR142.69
Each
units
Countersink 20mm 90° 3 HSS - 1 - -
RS Stock No. 456-898
BrandRS PRO
MYR120.80
Each
units
Countersink 12mm - 3 HSS 120 mm 1 - -
RS Stock No. 215-518
BrandRS PRO
MYR255.00
Each
units
Countersink Set 2 mm, 5 mm, 10 mm, 15 mm, 20 mm 90° - HSS - 4 - -
RS Stock No. 215-467
BrandRS PRO
MYR408.38
Each
units
Countersink Set 2 mm, 5 mm, 10 mm, 15 mm, 20 mm 90° - HSS - 4 - -
RS Stock No. 673-8701
BrandRS PRO
MYR53.49
Each
units
Countersink 8.3mm 90° 3 HSS 50 mm 1 6 mm 38mm
RS Stock No. 673-8691
BrandRS PRO
MYR48.37
Each
units
Countersink 6.3mm 90° 3 HSS 45 mm 1 5 mm 35mm
RS Stock No. 673-8697
BrandRS PRO
MYR438.58
1 Set
Set(s)
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - -
RS Stock No. 218-595
BrandRS PRO
MYR79.82
Each
units
Countersink 12mm 90° 5 HSS - 1 - -
RS Stock No. 215-423
BrandRS PRO
MYR71.48
Each
units
Countersink 5mm 90° - HSS 45 mm 1 6 mm 32mm
RS Stock No. 218-589
BrandRS PRO
MYR93.58
Each
units
Countersink 16mm 90° 5 HSS - 1 - -
RS Stock No. 218-602
BrandRS PRO
MYR68.89
Each
units
Countersink 8mm 90° 5 HSS - 1 - -
RS Stock No. 218-551
BrandRS PRO
MYR53.96
Each
units
Countersink 6mm 90° 3 HSS - 1 - -
Related Products
RS PRO range of three and five flute ...
Description:
RS PRO range of three and five flute high sped steel (HSS) countersink drill bits that conform to DIN 335/C standard. 90° flutes for use with machines and portable toolsThree-flute designed to reduce clogging, improve clearance and be chatter freeThree-flute ...
RS PRO range of three and five flute ...
Description:
RS PRO range of three and five flute high sped steel (HSS) countersink drill bits that conform to DIN 335/C standard. 90° flutes for use with machines and portable toolsThree-flute designed to reduce clogging, improve clearance and be chatter freeThree-flute ...
Introducing the G1366.3 from Dormer is a straight ...
Description:
Introducing the G1366.3 from Dormer is a straight shank Countersink bit, an essential accessory for any tradesman. Used for various types of materials and when using screws, bolts or rivets they can provide a flush neat finish. Designed with three ...
Introducing the G13610.4 from Dormer is a straight ...
Description:
Introducing the G13610.4 from Dormer is a straight shank Countersink bit, an essential accessory for any tradesman. Used for various types of materials and when using screws, bolts or rivets they can provide a flush neat finish. Designed with three ...