Air Compressors

Use Air Compressors to work smarter and quicker. Our range includes leading brands such as CIF, DeWALT, SIP and Welding Star. Air compressors are vital pieces of equipment for all workshops, garages and DIY enthusiasts.


How do they work?


Air compressors use a gas or electric engine to suck in volumes of air and squeeze it into a small space. This process increases the pressure by making the volume smaller. The air is then stored in a receiver tank and can be used for many applications.


What is an air compressor used for?


Domestic uses include airbrushing, pressure washing, tyre inflating, sandblasting, air blow guns, and paint guns. Industrial uses include: power tools, sanding, pneumatic tools, grinding, diving equipment, nail guns, paint workshops.


How do I determine which air compressor I need?


Compressors are measured in two ways: pounds per square inch (PSI) and cubic feet per minute (CFM). These measurements determine the effectiveness of the compressor. You will need to identify what PSM and CFM your tools or equipment need.


If you are only going to run one tool at one time off the compressor then you will need to look at the tool that has the highest PSI and CFM requirement. If, on the other hand, you want to run multiple tools from the air compressor you will need to total up the PSI and CFMs of each of the tools.


As the air is stored in a tank, the size of the tank will impact how the compressor works. For tools and equipment that need continuous air, a larger tank is better as this will be able to produce enough CFM. For tools that will be intermittently used a smaller tank is sufficient.


The horsepower is normally between 1.5HP and 6.5HP on an air compressor. Higher ones are available, but these are usually only used in industrial areas.


Single-stage or two stage compressors?


Single-stage air compressors, also known as piston compressors, have one or more cylinders. Each cylinder will pump air into the storage tank.


Two-stage air compressors have two cylinders and the air is pumped from one cylinder to the other cylinder, cooled, then delivered into the storage tank. These are mainly used where high pressure is needed as they have double the pressure.


Applications


Air Compressors are used in Industrial & DIY applications.


...
Read more Read less

Filters

Viewing 1 - 13 of 13 products
Results per page
Description Price Maximum Pressure Receiver Volume Motor Rating Weight Petrol Operated Plug Type
RS Stock No. 386-7828
Mfr. Part No.F41045
BrandCIF
MYR3,580.47
Each
units
6bar 1L 135W 14.5kg - Type C - Euro Plug
RS Stock No. 182-8736
Mfr. Part No.1828736001
MYR1,978.68
Each
units
114psi 24L 1.5HP - - Type G - British 3-pin
RS Stock No. 136-7574
Mfr. Part No.06296
BrandSIP
MYR1,287.27
Each
units
8bar 24L - 19.5kg - Type G - British 3-pin
RS Stock No. 136-7573
Mfr. Part No.05295
BrandSIP
MYR965.02
Each
units
8bar 6L - 9.5kg - Type G - British 3-pin
RS Stock No. 188-9707
Mfr. Part No.6245
BrandSIP
MYR1,953.13
Each
units
116psi 100L - 45kg - UK
RS Stock No. 136-7579
Mfr. Part No.06248
BrandSIP
MYR1,456.53
Each
units
8bar 6L - 15kg - Type G - British 3-pin
RS Stock No. 890-3657
Mfr. Part No.F41043
BrandCIF
MYR9,701.71
Each
units
8bar 24L 340W 29kg - Type C - Euro Plug
RS Stock No. 175-1190
Mfr. Part No.DCC1054T2-GB
BrandDeWALT
MYR3,808.81
Each
units
9bar 9.5L 0.4HP 11kg No Type G - British 3-pin
RS Stock No. 178-6071
Mfr. Part No.06457
BrandSIP
MYR943.85
Each
units
116psi 24L - 25kg - -
RS Stock No. 136-7581
Mfr. Part No.06258
BrandSIP
MYR3,153.52
Each
units
10bar 50L 3HP 39kg - Type G - British 3-pin
RS Stock No. 175-1191
Mfr. Part No.DCC1054N-XJ
BrandDeWALT
MYR2,029.37
Each
units
9bar 9.5L 0.4HP 11kg No -
RS Stock No. 136-7577
Mfr. Part No.06242
BrandSIP
MYR1,930.58
Each
units
9bar 50L 3HP 45kg - Type G - British 3-pin
RS Stock No. 188-9706
Mfr. Part No.6249
BrandSIP
MYR800.44
Each
units
116psi 24L - 16.3kg - UK