Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 1 - 20 of 537 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 534-648
BrandRS PRO
MYR0.715
Each (In a Pack of 100)
units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.5mm 4.8mm 16AWG Insulated 14AWG - Blue - PVC -
RS Stock No. 842-012
Mfr. Part No.34070
MYR0.591
Each (In a Pack of 100)
units
Butt - 22 → 16 AWG - 27.33mm 3.56mm - Insulated - - Red - - -
RS Stock No. 170-9398
Mfr. Part No.34070
MYR483.18
1 Box of 1000
Box(es)
Butt - 22 → 16 AWG - 27.33mm 3.56mm - Insulated - - Red - - -
RS Stock No. 170-9442
Mfr. Part No.320559
MYR3.116
Each (In a Bag of 50)
units
Butt - 22 → 16 AWG - 32.13mm 3.18mm - Insulated - - Red - Nylon -
RS Stock No. 534-288
BrandRS PRO
MYR0.727
Each (In a Pack of 100)
units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 24.5mm 4mm 22AWG Insulated 16AWG - Red - PVC -
RS Stock No. 528-9264
Mfr. Part No.320559
MYR2.716
Each (In a Pack of 100)
units
Butt - 22 → 16 AWG - 32.13mm 3.18mm - Insulated - - Red - Nylon -
RS Stock No. 533-673
Mfr. Part No.DS-18-22-RS
MYR6.741
Each (In a Pack of 50)
units
Butt - 22 → 18 AWG - 36mm 3.7mm - Insulated - - Red - - -
RS Stock No. 883-7548
Mfr. Part No.221-413
BrandWago
MYR3.148
Each (In a Pack of 10)
units
- - 24 → 12 AWG - - - - - - 3 Clear - - -
RS Stock No. 239-3988
BrandRS PRO
MYR95.21
1 Box of 100
Box(es)
Butt - 26 → 19 AWG - - 2.08mm - Insulated - - Yellow - PP -
RS Stock No. 534-519
BrandRS PRO
MYR1.061
Each (In a Pack of 100)
units
Butt 4mm² 12 → 10 AWG 6mm² 24.5mm 5.8mm 12AWG Insulated 10AWG - Yellow - PVC -
RS Stock No. 170-9443
Mfr. Part No.320562
MYR2.586
Each (In a Bag of 50)
units
Butt - 16 → 14 AWG - 32.13mm 3.81mm - Insulated - - Blue - Nylon -
RS Stock No. 170-9441
Mfr. Part No.320570
MYR4.904
Each (In a Bag of 50)
units
Butt - 12 → 10 AWG - 42.06mm 5.59mm - Insulated - - Yellow - Nylon -
RS Stock No. 118-5691
Mfr. Part No.735410-0
MYR2.272
Each (In a Pack of 10)
units
Tap - 20 → 18.5 AWG - 17.5mm 12.5mm - Insulated - - Red - Glass Filled Nylon -
RS Stock No. 164-8674
Mfr. Part No.735410-0
MYR1.919
Each (In a Bag of 100)
units
Tap - 20 → 18.5 AWG - 17.5mm 12.5mm - Insulated - - Red - Glass Filled Nylon -
RS Stock No. 528-9286
Mfr. Part No.320562
MYR2.303
Each (In a Pack of 100)
units
Butt - 16 → 14 AWG - 32.13mm 3.81mm - Insulated - - Blue - Nylon -
RS Stock No. 528-9236
Mfr. Part No.320570
MYR4.211
Each (In a Pack of 100)
units
Butt - 12 → 10 AWG - 42.06mm 5.59mm - Insulated - - Yellow - Nylon -
RS Stock No. 531-368
BrandRS PRO
MYR0.702
Each (In a Pack of 25)
units
T-Tap 0.75mm² 18 → 14 AWG 2.5mm² 37mm 9.8mm 18AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 510-5346
BrandRS PRO
MYR37.23
1 Bag of 50
Bag(s)
T-Tap 0.75mm² 18 → 14 AWG 2.5mm² 37mm 9.8mm 18AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 239-4234
BrandRS PRO
MYR0.665
Each (In a Pack of 100)
units
Butt 0.2mm² 26 → 22 AWG 0.5mm² 20mm 2mm 26AWG Insulated 22AWG - Yellow - Nylon -
RS Stock No. 267-3997
BrandRS PRO
MYR1.238
Each (In a Pack of 100)
units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 31mm 4mm 22AWG Insulated 16AWG - Red - Nylon -