Wire Rope Clamps

Wire rope clamps are a type of hardware that is used to create a loop in a piece of wire rope, and clamp it into place. This loop can be used as a load bearing eye. Wire rope clamps are often known as also known as wire rope clips or wire rope grips. The clamp fitting consists of a u-bolt and a saddle secured by two nuts, and is usually made from stainless steel.


How to use wire rope clamps?


The loose end of a wire is looped back and threaded through the wire rope clamp. The nuts on the clamp are then tightened to secure the end. Two to three clamps are used for a secure fitting. The u-bolt must always be placed on the load-bearing side of the wire rope. This protects the rope against crushing.


Material and sizes


Available in steel and stainless steel and in a wide range of sizes to suit different rope diameters, for example 8 mm or 10 mm.


What is DIN1142?


DIN1142 is an industrial standard for wire rope clamps and clips.


...
Read more Read less

Filters

Viewing 1 - 9 of 9 products
Results per page
Description Price Specification Wire Rope Diameter Material
RS Stock No. 183-5908
BrandRS PRO
MYR36.41
Each
units
DIN 741 5mm Stainless Steel
RS Stock No. 247-9076
BrandRS PRO
MYR37.17
Each
units
DIN 741 6mm Stainless Steel
RS Stock No. 124-4800
BrandRS PRO
MYR2.73
Each
units
DIN 741 5mm Carbon Steel (U-Bolt), Steel (Bridge)
RS Stock No. 197-0174
BrandRS PRO
MYR218.87
1 Bag of 6
Bag(s)
DIN 1142 13mm Steel
RS Stock No. 197-0146
BrandRS PRO
MYR72.27
1 Bag of 6
Bag(s)
DIN 1142 6.5mm Steel
RS Stock No. 183-5891
BrandRS PRO
MYR28.44
Each
units
DIN 741 3mm Stainless Steel
RS Stock No. 197-0168
BrandRS PRO
MYR117.50
1 Bag of 6
Bag(s)
DIN 1142 10mm Steel
RS Stock No. 197-0152
BrandRS PRO
MYR58.81
1 Bag of 6
Bag(s)
DIN 1142 8mm Steel
RS Stock No. 197-0130
BrandRS PRO
MYR38.37
1 Bag of 6
Bag(s)
DIN 1142 5mm Steel