John Drummond DRUMTL10 Voltage Indicator CAT III 1000 V, CAT IV 600 V

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): PH
Product Details

Drummond Test Lamps MTL10

Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the recommendations of the UK Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.

Supplied with

Carry case, right angled probe tip, two straight tips and instructions

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit

Mains Voltage Indicators - Contact

Specifications
Attribute Value
Maximum Voltage 500V ac/dc
Safety Category CAT III 1000 V, CAT IV 600 V
Display Type LED
IP Rating IP67
Power Source Mains
Dimensions 213 x 112 x 72mm
Weight 320g
Height 72mm
Length 213mm
Maximum Operating Temperature +55°C
Model Number p DRUMTL10
Safety Category Voltage 600 V, 1000 V
Width 112mm
Safety Category Level CAT III, CAT IV
Minimum Operating Temperature -10°C
23 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 428.77
units
Per unit
1 +
MYR428.77
Related Products
The U1190 Series clamp meters are built to ...
Description:
The U1190 Series clamp meters are built to perform in the environments you work. Ergonomically built, the U1190 Series clamp meters fit comfortably in the palm of your hand and allow you to select measurement functions with just a simple ...
RS Pro VP-3 Volt Stick is a pen ...
Description:
RS Pro VP-3 Volt Stick is a pen style non-contact AC voltage indicator. Safely checks the presence of an AC voltage in cables, wall sockets, fuses and junction boxes. No current flow is needed for correct operation. An essential tool ...
The Non-Contact VoltStick® is a tester for safely ...
Description:
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic ...
The FLIR VP50 is a tough Non-Contact Voltage ...
Description:
The FLIR VP50 is a tough Non-Contact Voltage Detector featuring a combination of alerts – including tactile vibration, red LED alarms, and a powerful LED worklight— so you’ll never miss the presence of voltage even in dark or noisy areas. ...