Ideal Networks R158003 Video, Data & Voice Wiring Tester of Voice

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Ideal Networks VDV II Pro Video, Data & Voice tester

'More than just a wiremapper', Ideal Networks presents the VDV II Pro cable tester, with all the VDV II plus features and much more.

Designed with a larger back-lit LCD display at 2.9" working in darker environments is made light work. Easy to use with state of the art technology it offer functionality not previously available in a wiremapper. An advanced wire map engine displays complex faults instantaneously whilst TDR aids trouble shooting to hugely decrease down time. (Time Domain Reflectometry) Additional feature include the Distance to open/Short, media service detection, Ethernet detection, Netwrok rate and Duplex information. Integrated RJ11, RJ12, RJ45 and F-Type connectors allow fast tests on low-voltage cables, and prevent the need for adapters, probes or separate testers. The remote unit is stored within the device to reduce loss and damage, this device is sleek, robust, fast and efficient.

Features and Benefits:

• TDR Length testing and troubleshooting
• Tone generator
• PoE Detection and voltage information
• Supports all common LAN cables
• Ethernet detection, network rate and duplex
• Media Service Detection, Analog and Digital
• Voltage protection

How does TDR work?

Damaged cables, open and short circuits change impedance, TDR injects a signal into the cable and measures the time it is reflected back taking this into account. It then translates the time into an accurate distance enabling an engineer or technician to pin point where the fault is.

Supplied with

1 x dual port remote unit, 1 x coax remote unit, 1 x alkaline battery, 1 x multi-language user guide, 2 x RJ45 to alligator clip cable 390mm, 2 x screened RJ45 to RJ45 cable 150mm, 2 x RJ12 to RJ12 cable 100mm, 1 x F-type plug to F-type plug cable 230mm, 1 x F-81 barrel splice, 1 x BNC female to F-type male adaptor, 1 x BNC female to F-type female adaptor, 1 x RCA female to F-type male adaptor, 1 x RCA female to F-type female adaptor, 1 x wallet wiring card, 1 x carry case.

Specifications
Attribute Value
Model Number VDV II PRO
Cable Type RJ12, RJ45
Test Type Voice
Maximum Cable Length 300m
Tone Yes
Maximum Number of Cables 8
Display Type LCD
Power Source Battery
Battery Type 9V
Battery Life 20 h
Dimensions 160 x 76 x 36mm
Weight 260g
Maximum Operating Temperature +50°C
Height 36mm
Minimum Operating Temperature 0°C
Length 160mm
Width 76mm
26 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 2,214.58
units
Per unit
1 +
MYR2,214.58
Related Products
Replacement accessory set for SecuriTEST IP. 1 x ...
Description:
Replacement accessory set for SecuriTEST IP. 1 x 3m coax cable with two end BNC (m) connectors, 1 x 3m DC12V 3.5(f) to 2.5(f) power cable, 2 x RS485 female green plug.
Beha-Amprobe SC-7000-EUR signal clamp is used with Beha-Amprobe ...
Description:
Beha-Amprobe SC-7000-EUR signal clamp is used with Beha-Amprobe AT-7000 advanced wire tracers when there is no access to bare conductors. The clamp induces a signal into either energised or de-energised circuits for wire tracing and load locating. The AT-7000-TE transmitter ...
Conveniently checks the continuity of screened/unscreened telephone and ...
Description:
Conveniently checks the continuity of screened/unscreened telephone and computer link cabling systems (up to 1000ft/0.3km). The tester accommodates RJ11/RJ45, and DEC type plug interfaces. An immediate, simple, visual LED indication is provided of line continuity, by depressing a conveniently located ...
Small hand-held tester with one remote, allowing one-person ...
Description:
Small hand-held tester with one remote, allowing one-person testingQuickly tests twisted pair cableChecks continuity and configurationDebug mode for fault and pair identificationTests all common data wiring configurationsFaults detected: shorts, opens, miswires, reversals and split pairs.