TE Connectivity 470kΩ Metal Oxide Resistor 1W ±5% ROX1SJ470K

From TE Connectivity, the ROX1S Series of Power Metal Oxide Film Resistors provide high power with a compact, space-saving size. Ideal for line protection applications, the ROX1S series of resistors are flame proof and can withstand overload conditions. The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines.

• High power in a compact form
• Excellent long-term stability
• 1W Rated dissipation at 70°C
• ±5% Resistance tolerance
• ±300ppm/°C Temperature coefficient
• 350V Limiting element voltage
• 600V (max.) Overload voltage
• 1000MΩ Insulation resistance
• Solvent resistant coating
• High surge/overload capacity
• Complete flameproof construction

• Rated dissipation at 70°C: 1W
• Resistance tolerance: ±5%
• Temperature coefficient: ±300ppm/°C
• Limiting element voltage: 350V
• Overload voltage: 600V (max.)
• Insulation resistance: 1000MΩ
• Operating temperature: -55°C → +235°C
• Body Length: 9 mm
• Body Diameter: 3 mm
• Lead Length: 25 mm
• Lead Diameter: 0.7 mm

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.

The ROX series of resistors comprise of a metal oxide film deposited onto a high quality alumina former. Attention to materials and processing quality allow a reduced physical size for each of the three power ratings with very good long term stability. The end cap and welded wire construction ensure high mechanical stability and strength. A specially formulated coating protects the element from environmental conditions and will withstand overload conditions without flame or mechanical damage. Recommended uses include all applications where overload conditions must not cause flaming. Value and tolerance markings is by four band colour code in accordance with IEC62. Rated at 70°C mounted horizontally in free air. Climatic category 55/235/56.