Camloc by Alcoa M12 x 1.75 Threaded Insert Hand Tool

  • RS Stock No. 668-4724
  • Mfr. Part No. KRTM12-02
  • Manufacturer Keenserts
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Specifications
Attribute Value
Thread Size Range M12 x 1.75
Temporarily out of stock - back order for despatch 14/02/2020, delivery within 4 working days from despatch date
Price Each
MYR 576.39
units
Per unit
1 +
MYR576.39
Related Products
Tough, impact resistant handleHigh speed steel tap for ...
Description:
Tough, impact resistant handleHigh speed steel tap for a clean cut and long lifePrecision ground threads for accurate threading50 mm long blade for improved accessTotal length: 113 mmThread pitch: 0,6 mm.
Recoil helically wound wire thread inserts can be ...
Description:
Recoil helically wound wire thread inserts can be used to strengthen threads, giving applications a longer life. Each insert shares the load over the entire bolt and hole, improving holding or pull out resistance, providing a more even distribution of ...
HSS-G manual tap with straight flute, profile ground ...
Description:
HSS-G manual tap with straight flute, profile ground and relief groundTwo-part sets with one taper and one plug tap in each sizeFor UNF unified fine threads, tolerance 2BSquare stemTap wrench available under order no. 508-9389 ff.
Introducing the RS PRO left-handed thread hand tap ...
Description:
Introducing the RS PRO left-handed thread hand tap set. This high-quality set features all the essential pieces of equipment and accessories needed to successfully clean or cut new threads on fasteners, holes and much more. The HSS (High-Speed Steel) material ...