Maxim DS18B20+, Temperature Sensor -55 → +125 °C ±0.5°C 1-Wire, 3-Pin TO-92

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PL
Product Details

DS1820/1822/1825 1-Wire Digital Thermometer & Thermostat

The DS1820/1822/1825 devices are temperature-to-digital converters with over/under-temperature detection. They feature a 1-Wire communication interface and powered from that data line. Applications include PCs, mobile phones, office equipment and data loggers.

Measurement temperature range: -55 to +125°C
Conversion Time (Max): 93.75 ms (9-bit), 750 ms (12-bit)
Unique 64-bit serial code stored in on-chip ROM
Power supply: +3.0 V to +5.5 VDC or from data line

The Maxim DS18B20 is a digital thermometer within a 3-pin TO-92 package. This device integrates both the temperature sensor and EEPROM into one package, saving space on your PCB.
The DS18B20 utilises 1-Wire® technology, meaning it only requires one data line for communication with a microprocessor, plus the ground (GND). It also offers “parasite power” mode, meaning it takes power directly from this data line, so you don’t need an extra power supply. Not only that, you can add as many DS18B20 devices to a single microprocessor through the same 1-Wire bus. Each DS18B20 device features a unique 64-bit serial code on board to help this.

Alarm function:
The DS18B20 offers flexibility with a non-volatile upper and lower trigger point on the alarm function. It is able to identify each device with temperatures outside of your chosen limits.

What temperatures can the DS18B20 measure?
The DS18B20 measures temperatures from -55°C to +125°C. It has a programmable resolution from 9 to 12 Bits.

Where is it used?
HVAC environmental controls
Thermostatic controls
Temperature monitoring systems
Industrial systems
Consumer products
Thermally sensitive systems


Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

Temperature & Humidity Sensors, Maxim Integrated

Attribute Value
Sensor Function Temperature
Output Type Digital
Interface Type 1-Wire
Accuracy ±0.5°C
Mounting Type Through Hole
Pin Count 3
Operating Temperature Range -55 → +125 °C
Minimum Operating Temperature -55 °C
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 5.5 V
Package Type TO-92
Length 4.95mm
Height 4.95mm
Width 3.94mm
Dimensions 4.95 x 3.94 x 4.95mm
Resolution 12 bit
359 Within 2 working day(s)
29 Within 4 working day(s) (Global stock)
Price Each
MYR 12.47
Per unit
1 - 1
2 - 4
5 +
Related Products
VEML6040 color sensor senses red, green, blue, and ...
VEML6040 color sensor senses red, green, blue, and white light and incorporates photodiodes, amplifiers, and analog / digital circuits into a single chip using CMOS process. With the color sensor applied, the brightness, and color temperature of backlight can be ...
The MAX30205 temperature sensor accurately measures temperature and ...
The MAX30205 temperature sensor accurately measures temperature and provide an overtemperature alarm/interrupt/shutdown output. This device converts the temperature measurements to digital form using a high-resolution, sigma-delta, analog-to-digital converter (ADC). Accuracy meets clinical thermometry ...
The MAX6665 thermal switch & fan controllers are ...
The MAX6665 thermal switch & fan controllers are designed to drive a cooling fan when the temperature of the device exceeds that of the factory-programmed threshold.The MAX6665 series is suitable for notebook & desktop computers, PC power supplies, laboratory instruments, ...
The PTS series of platinum SMD flat chip ...
The PTS series of platinum SMD flat chip temperature sensors can measure and monitor temperatures in any environment due to their platinum thin film component. Suitable applications include avaiation, automotive and industrial electronics. Features;Advanced thin film technologyShort reaction timesExcellent ...