ABB 7.79 V 20kA OVR, DIN Rail Mounting

  • RS Stock No. 175-2603
  • Mfr. Part No. OVR SL06
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

ABB Surge Suppressor Unit

The ABB OVR series surge suppressor unit is a protective device to ensure that electrical equipment is not damaged by a sudden voltage spike. It has an electrical rating of 7.79V and 20kA. It is a combined category D, C, B tested protector suitable for twisted pair signalling applications, which require either a lower in-line resistance, increased current and/or higher bandwidth. Also, suitable for DC power applications less than 0.75Amps. For use at boundaries up to LPZ 0 to protect against flashover (typically the service entrance location) through to LPZ 3 to protect sensitive electronic equipment.

Features and Benefits

• DIN rail mount
• High (750mA) maximum running current
• High bandwidth enables higher frequency (high traffic or bit rate) data communication
• Operating temperature ranges between -40°C and 80°C
• Repeated protection in lightning intense environments
• Screen terminal enables easy connection of cable screen to earth
• Strong, flame retardant, polycarbonate housing
• To protect systems against transient overvoltages or surges from lightning and electrical switching events
• Ultra-slim product of 7 mm width
• Very low let-through voltage between all lines - Full mode protection

Applications

• High-speed digital communication equipment
• Process control
• Systems with long signal lines

Certifications

• IEC 61643-21

Specifications
Attribute Value
Maximum Voltage Rating 7.79 V
Mounting Type DIN Rail
Maximum Surge Current 20kA
Series OVR
Length 106.5mm
Depth 7mm
Height 104.6
Dimensions 106.5 x 7 x 104.6mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 951.88
units
Per unit
1 - 1
MYR951.88
2 - 4
MYR858.26
5 +
MYR780.24
Related Products
Type 2 surge protective devices are designed to ...
Description:
Type 2 surge protective devices are designed to protect electric installations and sensitive equipment against indirect surges with ensuring a low protection level (Up). They are characterized by their capacity to safely discharge current with 8/20 μs wave form. Patented ...
STP T23 20 is the series of combined ...
Description:
STP T23 20 is the series of combined Type 2+3/Class II+III devices for discharging voltage surges while providing a very fine voltage protection level. Suitable as the final stage of protection in panels with Type 2 protection devices installed upstream ...
Type 2/3 surge protection, consisting of protective plug ...
Description:
Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage 230 V AC/DC.
From WJ Furse, these lightning surge arrestors are ...
Description:
From WJ Furse, these lightning surge arrestors are designed for use on twisted-pair lines found in process control equipment, modems and communications interfaces. These surge protectors offer full mode protection with very low let through voltage (to BS EN 62305) ...