The Parallax motor mount is the wheel kit for the other two kits. This motor is the aluminium version so it provides a toughened chassis over the plastic. It can hold a total of 27kg with rugged tyres. Two independent motors drive the wheels so you can get the odometry feedback of your choice.
The Arlo robot is a mobile robot design to carry payloads. It is an indoor robot and uses a microcontroller for control. It is highly customizable with sensors and computers.
Features and benefits:
• Aluminium makes for a tough chassis with an increased payload support. • 36-step optical slotted disk with quadrature output on each axle. • Rugged inner-tubed tyres pneumatic tyres • Maximum payload of 27KG • Torque of 85lbs per motor assembly • Wheel rotation with no load: 100rpm
What’s in the kit?
• Two 12 VDC Motors. (Left & Right) • 36 Position quadrature encoder set • Two motor bearing blocks. • Two Main rims • Two rim rings • Two robot drive axle’s • Two 1/8 x 1” Roll Pink • Two Knobby tires with rubber tube • Two 0.5 ID x 1.125” OD Ball Bearing • Two Hex keys (5mm & 5/32”) • All screws and spacers.
This is only the wheel kit, to have a fully functioning robot you will need the below kits. Base Kit: 8430822 Top Kit: 8430796
Supplied with
All necessary screws and spacers
The Arlo Robotic System provides the basic hardware to build a mid-size robotics platform ideal for telepresence and autonomous robots. The format is one of a two-wheeled buggy with castors fore and aft. The user can then attach the processor board, motor control boards and sensor/actuator modules to suit their application.
