Valsteam ADCA Carbon Steel Steam Separator

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): PT
Product Details

Vertical Steam Separator S16/S

Vertical steam separator for the removal of moisture from steam and compressed air pipelines. Particles with heavier specific gravity, such as water and oil droplets, are separated from the steam and compressed air by centrifugal forces.
The condensate collects at the bottom of the separator and can be drained using a suitable steam or compressed air trap.

Features and Benefits

• Several possibilities of installation
• No moving parts
• Carbon steel body

Application Information

For use with steam, compressed air and other gases.

Materials

Body – EN10216-2/P235GH/1.0325
Heads – En10028-2/P265GH/1.0425
Inlet/Outlet Pipes – EN10216-2/P235GH/1.0325
Sockets Inlet/Outlet – ASTM A/105/1.0432
Sockets – ASTM A105/1.0432
Internals – EN10025-2/S235JR/1.0038

Standards

This product has been designed for use on water, steam and other gases which are in group 2 of the PED-European Equipment Directive 97/23/EC

Steam Separators

Specifications
Attribute Value
Orientation Vertical
Body Material Carbon Steel
Temporarily out of stock - back order for despatch 28/01/2020, delivery within 4 working days from despatch date
Price Each
MYR 1,797.80
units
Per unit
1 +
MYR1,797.80
Related Products
TD42L designed for relatively small condensate loads and ...
Description:
TD42L designed for relatively small condensate loads and ideal for mains drainage applications. TD42H is ideal for process type loadsScrewed BSP with in-built strainerCompact and lightweight, reducing installation costsPositive discharge with clean tight shut-off. No back-up of condensate ensures maximum ...
All units PN16 with Stainless Steel internal parts ...
Description:
All units PN16 with Stainless Steel internal parts and Reinforced Exfoliated Graphite gaskets, Straight Orientation; Maximum Operating Pressure - 14bar g; Maximum Allowable Pressure - 16 bar g; Maximum Cold Hydraulic Test Pressure - 24bar g; Cover Bolts Material - ...
These mechanical float and thermostatic steam traps have ...
Description:
These mechanical float and thermostatic steam traps have a spheroidal graphite SG iron body and stainless steel internals. Built with an integral air vent, they are designed for all types of low, medium and high pressure steam heating and process ...
These inverted bucket steam traps are recommended when ...
Description:
These inverted bucket steam traps are recommended when the most important requirements are overall operating efficiency and trouble free service life. They are best suited for service at medium and high steam pressure due to operating intermittently, either wide open ...