Freewheel/Bearing CSK-M 15mm

  • RS Stock No. 146-5259
  • Mfr. Part No. CSK 15-M
  • Manufacturer Stieber
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional nylos type seals is recommended especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible. All the CSK versions are equipped with formchromed sprags.

Specifications
Attribute Value
Series 6202
Inside Diameter 15mm
Outside Diameter 35mm
Race Width 11mm
Torque 17Nm
Over-running Speed 8400rpm
Dynamic Load Rating 7.4kN
Static Load Rating 3.42kN
Keyway Inner and Outer Race
Drag Torque 0.9Ncm
6 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 468.99
units
Per unit
1 - 4
MYR468.99
5 +
MYR450.22
Related Products
INA from Schaeffler radial insert ball bearings with ...
Description:
INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical ...
Deep groove ball bearings are versatile. They are ...
Description:
Deep groove ball bearings are versatile. They are simple in design, non-separable, suitable for high speeds and are robust in operation, requiring little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available from ...
Shielded (2Z) bearings are fitted with two metal ...
Description:
Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals.Deep groove ball bearings are versatile and robust in operation, they ...
Thrust bearings suitable for unidirectional axial loads, supplied ...
Description:
Thrust bearings suitable for unidirectional axial loads, supplied as three-part assemblies comprising of two grooved outer raceways and a caged ball set. These bearings are not suitable for radial loads.,Typical applications include vertical shaft bearings, steering columns etc.