Eaton Red Sounder Beacon, 18 → 24 V dc, IP55, IP65, Wall Mount, 101dB at 1 Metre

The Flashni DC flashy sounder beacon with a red lens is an audible and visual device with one single installation point. It has a sound output of 101dB. This reduces installation costs and is also less obtrusive than two separate devices. It is suitable for fire, industrial, and signalling application requiring a combined indication device.
Additional options:
Red deep base - 530-6066
White deep base - 530-6072
VdS approved sounder and beacons - 530-6038, 530-6016, 529-4474, 529-4452 and 529-4468
The sounder and beacon elements for 529-4474 and 529-4468 are individually wired. This enables them to be controlled separately
530-6038, 530-6016, 529-4474, 529-4452 and 529-4468 are EN54 part 3 compliant
529-4452 is CPD compliant
Warning:
This product exceeds the requirements of En54-3. However, it is not designed to meet EN54-23. Where the construction product directive or regulation (CPD/CPR) is a country requirement, it cannot be used, legally, to alert room occupants to a fire alarm condition. For countries where CPD/CPR is not applicable, this note should be disregarded.

The supply voltage is between 18VDC and 28VDC
Includes 3 tones with tone select switch
Reduced installation costs due to the single installation point
High output sounder beacon
Automatic sounder synchronisation
Suitable for a multitude of applications
Provides tone clarity, reducing confusion
Xenon flash
Volume control to alter the alarm to suit the application
Reverse polarity protected
ABS cases and polycarbonate Fresnel lens
Flash power of 0.7j
Operating temperature range is between -10°C and 55°C

You can install this sounder beacon by directly attaching it to a wall or flat machine surface. Its single installation point makes mounting quick and simple.

IP65 rated
CE certified

Yes, you can conveniently adjust the volume of this sounder using the built-in control button.

Eaton formerly known as Fulleon