Asco Solenoid Valve PV G256A002 V MS 24VCC, 2 port , NC, 24 V dc, 1/8in

  • RS Stock No. 656-3254
  • Mfr. Part No. PV G256A002 V MS 24VCC
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

256 series 2 / 2 direct operated solenoid valves

2 / 2 N/C direct-operated solenoid valves with 1/8" outlet size.
Wide range of flow rates and pressure differentials.
Protected by an enclosure for use in explosive environments.
2 m connection cable.

Standards

ATEX II 1G EEx ia IIT6 T3 compliant, IP65

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Direct
Connection 1/8 in G Female
Connection Size 1/8in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 2/2
Orifice Diameter 1.6mm
Body Material Brass
Maximum Working Pressure 12 bar
Operating Temperature Range -10 → +100 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +100°C
Maximum Opening Time 10ms
Connection Gender Female
Flow Factor Kv 0.08m³/h
Thread Standard or Connection Type G
Maximum Closing Time 10ms
Series 256
7 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 726.34
units
Per unit
1 +
MYR726.34
Related Products
Two-way, direct operated, EN161 approved solenoid valves for ...
Description:
Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection. Pressure not required for operationCompact & lightweightISO 4400 DIN connectionClass A, group 2 service ...
Three-way solenoid valves with zero bar minimum operating ...
Description:
Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection. Brass bodyPressure not required for operationCompact & lightweightDIN plug connection Ranging from -10°C to +100°CCan be mounted in any position.
Burkert proportional solenoid valves provide continuously adjustable and ...
Description:
Burkert proportional solenoid valves provide continuously adjustable and smooth control over the flow of fluid passing through them. Unlike conventional solenoid and process valves which offer only On or off control, Burkert 2871 series process valves use PWM (pulse width ...
Valves and control modules designed specifically to operate ...
Description:
Valves and control modules designed specifically to operate together, provide a valve opening which is proportional to the input signal and allows this to be correlated to the respective operating conditions. Control solenoids, signalling support and mini-sensor for E290 series ...