Asco Solenoid Valve E262C090E7A2, 2 port , NC, 24 V ac, 1/4in

  • RS Stock No. 488-611
  • Mfr. Part No. E262C090E7A2
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Two-way, N/C, Gas Pilot/Burner Control Valves

Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection.

Pressure not required for operation
Compact & lightweight
ISO 4400 DIN connection
Class A, group 2 service & Gas families 1 & 2
Can be mounted in any position

Approvals

EN161

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V ac
Number of Ports 2
Operation Direct
Connection 1/4 in Rp Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Combustible Gas
Type 2/2
Orifice Diameter 6.7mm
Body Material Brass
Maximum Working Pressure 2.1 bar
Operating Temperature Range 0 → +60 °C
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
Connection Gender Female
Flow Factor Kv 1.12m³/h
Maximum Closing Time 1s
Thread Standard or Connection Type Rp
Series 262
Maximum Opening Time 1s
Temporarily out of stock - back order for despatch 18/02/2020, delivery within 4 working days from despatch date
Price Each
MYR 640.57
units
Per unit
1 - 5
MYR640.57
6 - 11
MYR627.53
12 +
MYR620.82
Related Products
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Modular direct acting solenoid valve system. Brass body ...
Description:
Modular direct acting solenoid valve system. Brass body with polyamide coilCoil can be changed easily with valve in placeCoil can be locked in four by 90° positions or move free between, as requiredFPM high quality seal material Suitable for compressed ...
The direct-acting 3/2-way, normally closed type 6014Ex solenoid ...
Description:
The direct-acting 3/2-way, normally closed type 6014Ex solenoid valve is suitable for use with neutral and aggressive gases and fluids, for example: compressed air, town and natural gas, water, and hydraulic oil, in filling, dosing, and batching applications. The solenoid ...
Solenoid valves with and without EEx permitStainless steel ...
Description:
Solenoid valves with and without EEx permitStainless steel designFor partially aggressive liquids and gasesSuitable for vacuumsCompact actuation magnet with integrated sleeveValve operates without minimum pressure differential (Δp)ΔMagnet can be replaced without tools (Click-on®).