Burkert Solenoid Valve 076551, 2 port , NC, 230 V ac, 1/2in

  • RS Stock No. 440-947
  • Mfr. Part No. 076551
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Series 255 Two Way Normally Closed Solenoid Valves

For use with water, steam, air, gasses, hot oils and hydrocarbons, alkaline washing agents
Heat-resistant slip-over epoxy encapsulated coil
Brass body and PTFE Seal
Three-pin DIN connector rated to IP65 can be positioned 360° in 90° increments
Fluid temperature range to 180°C (130°C with fitted cable plug)
Ambient temperature +55°C maximum

//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif
//media.rs-online.com/t_line/L478735-22.gif
//media.rs-online.com/t_line/LD439155-02.gif
//media.rs-online.com/t_line/LE439155-02.gif
//media.rs-online.com/t_line/LI439155-02.gif

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Direct
Connection 1/2 in G Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Alcohol, Fuel, Hydraulic Oil, Organic Solvent, Steam, Waste Gas, Water
Type 2/2
Orifice Diameter 4mm
Body Material Brass
Maximum Working Pressure 12 bar
Operating Temperature Range -40 → +55 °C
Minimum Operating Temperature -40°C
Maximum Operating Temperature +55°C
Maximum Opening Time 20ms
Flow Factor Kv 0.5m³/h
Connection Gender Female
Maximum Closing Time 30ms
Series 0255
Thread Standard or Connection Type G
6 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 818.42
units
Per unit
1 - 5
MYR818.42
6 +
MYR782.82
Related Products
The SMC VX3000 series is a direct acting, ...
Description:
The SMC VX3000 series is a direct acting, 3 port solenoid valve. Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connectionClass B & Class H coil availableCompact ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero ...
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid mediaSuitable for vacuumFor systems with low or fluctuating pressure conditionsDefined flow directionValve works without minimum pressure differentialElectromagnetically actuatedWith forced liftClosing dampingWithout tool, interchangeable magnet (Click-on®).
Easy electrical installation by means of a screw ...
Description:
Easy electrical installation by means of a screw terminal coilEnclosure provided with a 1/2 NPT threaded entry hole (M20 x 1,5 in option) for a broad range of cable entriesA wide range of valves can be supplied with the operator. ...