Solartron Metrology Modbus Interface Module for use with Digital Measurement System, 0 → 10 V

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Orbit 3 Modim Modbus Interface Module

The Orbit 3 MODIM modbus interface module provides all users an easy gateway between MODBUS PLC’s and the Orbit 3 digital measurement system.. This is a highly accurate and flexible measurement system. The Modbus interface module also interfaces to any sensor with an analogue output including a wealth of other linear measurement sensors. This allows you to use the system for temperature, pressure, force, rotary measurement and linear displacement. All of these process variables to a PLC though just one simple Modbus communications interface.

MODBUS RTU up to 115200 baud
Access complex sensor networks with varying interfaces through a set of MODBUS parameters in a single device
Connects to all Solartron gauging probes, displacement, Orbit LT and Prbit LTH
Simple network setup via a PC application
Sealing – IP43
Hardware serial interface – RS485
Network protocol – MODBUS RTU SLAVE
Baud rates up to 115,200
Orbit modules - Linear Displacement Sensors range 0.25mm to 300mm. Analogue Input Modules 0-10V, 4- 20mA. Rotary Encoder Modules and Non Contact Laser Modules
Storage temperature -20 to +70°C


EN61000-6-3 and EN61326

Attribute Value
Accessory Type MODBUS Interface Module
For Use With Digital Measurement System
Operating Temperature Range +5 → +60 °C
Voltage Rating 0 → 10 V
Current Rating 20 mA
Temporarily out of stock - back order for despatch 30/12/2019, delivery within 4 working days from despatch date
Price Each
MYR 2,221.91
Per unit
1 +
Related Products
RFID - Radio-frequency Identification - can replace traditional ...
RFID - Radio-frequency Identification - can replace traditional bar-coding and electro-magnet tags as a method of product tracking. The OsiSense XG system operates at 13.65Mhz, and uses tag readers that are compatible with almost all tags conforming to ISO 18000-3, ...
Pepperl + Fuchs SC-System signal conditioners are especially ...
Pepperl + Fuchs SC-System signal conditioners are especially designed for general purpose applications and ensure reliable process communication. High-quality isolation, an extended temperature range, and an extremely compact housing design characterise the signal conditioner range. The SC-System offers powerful ...
The Brad I/O module is a PNP type ...
The Brad I/O module is a PNP type M8 3-pin and M8 5-pin connection type used with DeviceNet controller roller drives IO-link. This module brad net harsh IO M8 modules are the only modules that combine an extremely compact housing ...
The Brad I/O module is a PNP type ...
The Brad I/O module is a PNP type M12 4-pin and M12 5- pin B connection type used with PROFINET controller IO-Link. It is designed for factory automation machine builders which brings versatility and cost-savings to complex system designs through ...