Development Kit Hall Switch for use with Door, Lids, Tray Position Detecting

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Two Monolithic Unipolar Hall Switches
Operation with a North Pole (Output1) to Part Marking Surface
Operation with a South Pole (Output2) to Part Marking Surface
Supply Voltage of 1.6V to 3.6V
Micropower Operation
Dual Outputs for Independent Pole Detection for Design Flexibility
Internal Pull up and Pull Down Capability
Chopper Stabilized Design
Superior Temperature Stability
Extremely Low Switch-Point Drift
Insensitive to Physical Stress
Good RF Noise Immunity
Operating Temperature Range -40C to +85C
8kV ESD on Supply and Output Pins
Small Low Profile X2-DFN1410-4
Totally Lead-Free
Halogen and Antimony Free. “Green” Device (Note 3)
Smart Cover or Dock Detect for Cellular Phones and Tablet
Position Detect for Digital Still, Video Cameras and Handheld Gaming Consoles
Door, Lids and Tray Position Detect Switches Home Appliances and Industrial Applications
Level, Proximity and Position Switches
Contact-Less Switches in Home Appliances and Industrial Applications

Specifications
Attribute Value
For Use With Door, Lids, Tray Position Detecting
Kit Classification Development Kit
10 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR87.00
MYR 76.56
units
Per unit
1 +
MYR76.56
Related Products
The HTWM offers the same performance as the ...
Description:
The HTWM offers the same performance as the HTW proportional thumbwheel but with a much shorter behind panel depth. Available with four output options, the HTWM offers a self-centre, single axis thumbwheel actuator that provides linear change in voltage output ...
Product DescriptionThe MCS 18 range of switches from ...
Description:
Product DescriptionThe MCS 18 range of switches from Schurter offer unique mechanical switches with great tactile feedback. The MCS 18 offers a low profile design and easy snap mounting with IP 65 rating to the front of the switch. Features ...
Using a third common contact pin halves the ...
Description:
Using a third common contact pin halves the PCB area to maximise code setting on crowded PCB’s. They are also used widely for two state, pull up / pull down resistor setting. Large numerals and EIA colour coded sliders.Base and ...
Range of normally open switches for SMT mounting.Their ...
Description:
Range of normally open switches for SMT mounting.Their very small sizing make then particularly well suited to high-density printed circuits.Contact material: silverAvailable in 2 activation strengths: 3 and 4 Newton.The KMS version features a lateral contact.These switches are compliant with ...