Recently searched

    ABB Safety Controller

    RS Stock No.:
    733-2477
    Mfr. Part No.:
    2TLA020054R0300 Tina 4A
    Manufacturer:
    ABB
    ABB
    View this category
    Temporarily out of stock - back order for despatch 07/10/2022, delivery within 4 working days from despatch date
    Add to Basket
    units

    Added

    Price Each

    MYR1,195.29

    unitsPer Unit
    1 +MYR1,195.29
    RS Stock No.:
    733-2477
    Mfr. Part No.:
    2TLA020054R0300 Tina 4A
    Manufacturer:
    ABB

    Legislation and Compliance


    Product Details

    Pluto Safety PLC, Base Unit


    Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus (733-4836), CanOpen (733-4830), Devicenet (733-4849) and Ethernet (733-4842). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation.


    Simple and easy programming facilities
    Easy to configure and install
    Up to 640 I/O's
    Multiple Plutos can be connected on a bus (via using the IDFIX identifier) and then further interfaced with external networks by using a Gateway, typical example RS stock number (733-4842)
    High safety level
    Free software available
    Programming over the bus
    35 mm DIN rail mounting
    The IDFIX (733-4824) is an identification circuit which allows multiple Plutos to be identified when connected on a bus system. This module is available to distribute a PLC program within a network of Pluto devices.
    Tina adapters such as (733-2477) can be used to connect external safety monitoring equipment


    Note

    The IDFIX device (733-4824) is connected between the input terminals ID and 0V (also note that the IDFIX device is not required when using a single Pluto, however the absense of an IDFIX requires to be stated when programming the Pluto device.)

    Approvals

    TUV, FS, CSA

    Standards

    European Machinery Directive 2006/42/EC
    EN ISO 12100-1, EN ISO 12100-2,
    EN 60204-1, EN 954-1, EN ISO 13849-1,
    EN 62061


    Temporarily out of stock - back order for despatch 07/10/2022, delivery within 4 working days from despatch date
    Add to Basket
    units

    Added

    Price Each

    MYR1,195.29

    unitsPer Unit
    1 +MYR1,195.29