John Drummond MTL20 Voltage Indicator & Proving Unit Kit 28mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit

Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V

Essential to check the MTL20 for correct operation prior to working on electrical circuits
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)

Carry case, right angled probe tip, two straight tips and instructions

Mains Voltage Indicators - Contact