Lattice Semiconductor iCE40LP1K-BLINK-EVN iCEblink40 Evaluation Kit iCEblink40-LP1K

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Lattice iCEblink40-LP1K Evaluation Kit

A low-cost platform for evaluating and developing with the low-power iCE40LP1K FPGA. The board provides access to general-purpose I/O and includes capacitive-touch buttons and LEDs. The board is powered and programmed via USB. An on-board microcontroller enables 2-way communication with the iCE40LP1K FPGA. The free iCEcube2™ development tool controls programming, accesses virtual I/O functions and runs the included demos. The tools can be downloaded from the Lattice website.

Low-power, small-footprint iCE40LP1K FPGA in 84-pin QFNS package
USB programming, debugging, virtual I/O functions, and power supply
4 x User LEDs
4 x Capacitive-touch buttons
3.3MHz clock source
1Mbit SPI serial configuration PROM
Supported by Lattice iCEcube2 design software
63 x LVCMOS/LVTTL (3.3V) digital I/O connections on 0.1in through-hole connections
Supports third-party I/O expansion boards and modules, including 3.3V Arduino Shield boards (requires additional sockets, not supplied)

Supplied with

USB cable for power & programming, QuickStart Guide

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Programmable Logic Technology FPGA
Kit Classification Evaluation Kit
Featured Device ICEblink40-LP1K
Kit Name ICEblink40
8 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 235.25
units
Per unit
1 +
MYR235.25
Related Products
The VM800P is a development module, designed to ...
Description:
The VM800P is a development module, designed to provide engineers with everything necessary to create quality Human Machine Interface (HMI) solutions with display, audio and touch functionality.This completely Arduino-compatible module features an FT800 chip for three in one operation (display, ...
The Si82xx evaluation board allows designers to evaluate ...
Description:
The Si82xx evaluation board allows designers to evaluate Silicon Laboratories’ family of ISOdrivers. The boards come populated with 5kVrms versions of the Si8220, Si8233, Si8234 and Si8235 and includes land pads for common surface-mount and through-hole packaged FET/IGBT power transistors. ...
4 Kbit and 16 Kbit I²C serial EERAM ...
Description:
4 Kbit and 16 Kbit I²C serial EERAM devicesFollows the published recommended capacitor selection for the EERAM deviceTest points with probe loops for SCL, SDA, VCC and GNDOn-board pull-ups for I²C bus operationSMD jumper options for 3.3V and 5V operationOn-board ...
This Microchip Evaluation Board demonstrates the MCP19111 digitally ...
Description:
This Microchip Evaluation Board demonstrates the MCP19111 digitally enhanced PWM Controller in a PMBus-enabled Point-of-Load Converter application. The board converts a 7V to 14V input range to an adjustable output of 0.8V to 3.6V. Nearly all operational and control system ...