Avnet AES-K7DSP-325T-G Xilinx Kintex-7 DSP Development Kit

  • RS Stock No. 768-6080
  • Mfr. Part No. AES-K7DSP-325T-G
  • Manufacturer Avnet
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Kintex 7 FPGA DSP Evaluation Kit

The Xilinx Kintex-7 from Avnet is an FPGA DSP development kit featuring high-speed analogue. It enables you to design, with your specific application in mind, right from the beginning.
This kit features two main parts; the Xilinx Kintex-7 FPGA KC705 based board and an FMC 150 daughter board. The Kintex-7 is a high performance board offering quick prototyping for serial connectivity applications and advanced memory interfacing. The integrated FMC daughter board enables you to interface with signals for your desired application.

Product applications
Wireless communications
Aerospace
Test and measurement
Medical imaging

What is included?
Xilinx KC705 Kintex-7 7K325T board
4DSP FMC150 High-Speed ADC/DAC FMC Module
12 V power supply
USB programming cable
Ethernet cable
Vivado ISE® Design Suite: System Edition
2 x MMCX RF coaxial cables
Reference design tutorials

Features and Benefits - Xilinx KC705 Development Board
FPGA: XC7K325T-2FFG900C
Onboard configuration circuitry
128 MB Parallel (BPI) Flash
256 MB Quad-SPI Flash
10/100/1000 Tri-Speed Ethernet
SFP+ transceiver connector
GTX port (TX, RX) with four SMA connectors
USB to UART Bridge
PCI Express x8 Edge Connector
DDR3 SO-DIMM (2 GB)
BPI Linear Flash (128 MB)
SDIO Interface
I2C EEPROM (1 Kb)
200 MHz oscillator (differential)
HDMI Output
12 V wall adapter or ATX

Features and Benefits - 4DSP FMC150 High-Speed ADC/DAC FMC Module
TI ADS62P49 dual 14-bit, 250 MSPS ADC
TI DAC3283 dual 16-bit, 800 MSPS, 2x/4x interpolation DAC
TI CDCE72010 clock synchronizer/jitter cleaner
External clock input option
50 Ohm, transformer-coupled analog I/O
External trigger input

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Programmable Logic Technology FPGA
Kit Classification Development Kit
Kit Name Xilinx Kintex-7 DSP
2 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 24,281.85
units
Per unit
1 +
MYR24,281.85
Related Products
The SAM D51 high performance micro-controller series is ...
Description:
The SAM D51 high performance micro-controller series is targeted for general purpose applications using the 32-bit ARM® Cortex®-M4 processor with Floating Point Unit (FPU), running up to 120 MHz ,up to 1 MB Dual Panel Flash with ECC, and up ...
The Microchip Technology Bluetooth module is an ultra-low ...
Description:
The Microchip Technology Bluetooth module is an ultra-low power system on a chip, which includes an MCU, transceiver, modem, MAC, PA, TR switch and a Power Management Unit (PMU). It has a standalone Cortex-M0 applications processor with embedded flash memory ...
The Renesas Electronics MCU Development module integrates multiple ...
Description:
The Renesas Electronics MCU Development module integrates multiple series of software and pin-compatible Arm-based 32-bit cores. The controllers share a common set of Renesas peripherals to facilitate design scalability and efficient platform-based product development. It ensures accelerated code development with ...
The STM8S-DISCOVERY board aids evaluation of the STM8S ...
Description:
The STM8S-DISCOVERY board aids evaluation of the STM8S family of 8-bit microcontrollers. The ST-LINK module may be detached from the processor board and used to program/debug other STM8S-based boards. • 16MHz STM8S105C6T6 microcontroller with 32KB Flash memory, 2KB RAM, 1KB ...