Altera PL-USB-BLASTER-RCN USB Blaster Programmer

  • RS Stock No. 690-4093
  • Mfr. Part No. PL-USB-BLASTER-RCN
  • Manufacturer Altera
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Altera USB Blaster

The Altera USB Blaster is a great FPGA programming device. This device links your PC to a 10-pin header connected to your FPGA and will allow you to send configuration data from your PC to the FPGA during prototyping or to program data into the system during production. The blaster is compatible with Windows and Linux machines. With the 10-pin being integrated into the device, it makes for effortless using.

The USB blaster contains 3 different types of programming modes, these include:
Joint Test Action Group (JTAG) – Programs and configures all Altera devices
Passive Serial – Configures all Altera devices supported by Quartus II.
Active Serial – Programs a single EPCS1, EPCS4, EPCS16 or EPCS128.

Supported Series:
• Stratix FPGAs
• Cyclone FPGAs
• MAX Series CPLDs
• Arria FPGAs
• Apex FPGAs
• Acex FPGAs
• Mercury FPGAs
• Flex 10K FPGAs
• Excalibur FPGAs

Altera’s USB blaster needs to be used from a PC with either; Windows XP, Vista, 7, 8 or 10. Linux is also an option with support for all Linux systems.

Replacement cable: 847-1015 (This product is supplied with a cable)

Supplied with

USB cable (A to B)

Programmable Logic Programming

Specifications
Attribute Value
Programmable Logic Technology FPGA
Kit Classification Programmer
Kit Name USB Blaster
Temporarily out of stock - back order for despatch 03/02/2020, delivery within 4 working days from despatch date
Price Each
MYR 1,577.81
units
Per unit
1 +
MYR1,577.81
Related Products
The Digilent Zybo Z7-10 is a feature-rich, ready-to-use ...
Description:
The Digilent Zybo Z7-10 is a feature-rich, ready-to-use embedded software and digital circuit board built around the Xilinx Zynq-7000 family. The Zynq family is based on the Xilinx all programmable system-on-chip (AP SoC) architecture that tightly integrates a dual-core ARM ...
The Digilent Zybo Z7-20 development kit is a ...
Description:
The Digilent Zybo Z7-20 development kit is a feature-rich, ready-to-use embedded software and digital circuit board built around the Xilinx Zynq-7000 family. The Zynq family is based on the Xilinx All Programmable System-on-Chip (AP SoC) architecture that tightly integrates a ...
The Trenz electronic carrier board is an industry-grade ...
Description:
The Trenz electronic carrier board is an industry-grade FPGA module integrating a Xilinx Kintex-7 325T FPGA, 8 MGTs (Multi-Gigabit Transceivers) and 32Mb flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged ...
The Trenz electronic is an industrial-grade Xilinx Zynq-7030 ...
Description:
The Trenz electronic is an industrial-grade Xilinx Zynq-7030 System on the module with 4MGT links, a gigabit Ethernet transceiver, 1Gb DDR3 SDRAM, 32Mb SPI flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. ...