Georg Fischer Electro fusion Fitting 125 110mm Straight Reducer Coupler

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CH
Product Details

ELGEF+ Reducer Kit

This Georg Fischer reducer kit is ideally used for industrial pressure applications such as water and gas. The reducer provides an extensive combination of possibilities and with an ease of assembly. 4 mm pin connectors ensure a secure fit between all ends of the pipe.

Features and Benefits

Integral pipe fixation
Max pressure – 10 bar Gas / 16 bar Water
Limited path fusion indicators

George Fischer Electrofusion Fittings

Georg Fischer ELGEF+ is the electrofusion system for pressurised piping systems. Each part has been developed to work with all other system components. Whether for water, gas or other pressurised piping, above or below ground. Enables a quick and reliable connection of your pipes and spigot through electrofusion.

Specifications
Attribute Value
Fitting Direction Straight
Fitting Type Reducer Coupler
Series ELGEF Plus
Maximum Working Pressure 10 (Gas) bar, 16 (Water) bar
Length 367mm
Connection Size 125 110mm
Temporarily out of stock - back order for despatch 23/03/2020, delivery within 4 working days from despatch date
Price Each
MYR 376.73
units
Per unit
1 +
MYR376.73
Related Products
The SharkBite Push-Fit Solution is a quick and ...
Description:
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints.
The S030 fitting has a built-in paddlewheel to ...
Description:
The S030 fitting has a built-in paddlewheel to measure the flow rate. When liquid flows through the pipe, the paddle-wheel is set in rotation producing pulses which are proportional to the flow rate. Closed pipe system (sensor inside fitting)Sensor unit ...
CEJN's non drip couplings are designed for low-pressure ...
Description:
CEJN's non drip couplings are designed for low-pressure fluid and vacuum applications, and their performance and safety requirements. The product range is ideal for connecting all types of fluid lines. All have a single disconnect stage. Nickel-plated brass body, NBR ...
In-line flow adaptors incorporating paddle wheel transducer which ...
Description:
In-line flow adaptors incorporating paddle wheel transducer which is set in rotation when liquid flows through the pipe. G-port connection (internal thread)PVDF paddle wheel and ceramic axis and bearingMeasuring range from 0.3 m/s (AF> 1//2 inch pipe, 0.3 fps flow ...