Epson ERC-09 Black Printer Ribbon
- RS Stock No.:
- 251-6844
- Mfr. Part No.:
- ERC09B
- Manufacturer:
- Epson
Price 1 Bag of 10
MYR352.89
202 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ*
* Delivery dates may change based on your chosen quantity and delivery address.
FREE delivery for orders over MYR700.00
Bag(s) | Per Bag | Per Unit** |
|---|---|---|
| 1 + | MYR352.89 | MYR35.289 |
**price indicative
- RS Stock No.:
- 251-6844
- Mfr. Part No.:
- ERC09B
- Manufacturer:
- Epson
Microprocessor Controlled Alphanumeric Printers
Low cost, 24 column, panel-mounted, complete with data cable
Snap-in ink ribbon cartridges, printout on standard paper rolls
Incorporates highly reliable EPSON printer mechanisms
Ideal for use in automatic test equipment, communication terminals, data logging, weighing equipment, etc.
Selectable inverted print
Dot addressable graphics (144 dots per line)
Double width or height; double width/height printout modes
Built in self-test
Operating temperature range 0 to 50°C
Snap-in ink ribbon cartridges, printout on standard paper rolls
Incorporates highly reliable EPSON printer mechanisms
Ideal for use in automatic test equipment, communication terminals, data logging, weighing equipment, etc.
Selectable inverted print
Dot addressable graphics (144 dots per line)
Double width or height; double width/height printout modes
Built in self-test
Operating temperature range 0 to 50°C
Technical Specification
Parallel input TTL parallel interface, positive true; 7 bits, STROBE and BUSY Centronics protocol
Serial input V24/RS-232C protocol TTL interface, positive true; 1 start bit, 7 data bits, 2 or more stop bits, parity ignored. Pin selectable 110, 300, 1200, 2400 baud
Character set 96 character ASCII lower case and upper case
Character format 7 (high) x 5 (wide) dot matrix. 24 characters per line. Graphics mode, n x 144 dots. Double height and width character format, as well as text (standard) or data (inverted) mode, can be selected by sending appropriate control codes before printable codes
Connectors Polarised 16-way wrap posts (0.1 pitch) for data lead (supplied)
Serial input V24/RS-232C protocol TTL interface, positive true; 1 start bit, 7 data bits, 2 or more stop bits, parity ignored. Pin selectable 110, 300, 1200, 2400 baud
Character set 96 character ASCII lower case and upper case
Character format 7 (high) x 5 (wide) dot matrix. 24 characters per line. Graphics mode, n x 144 dots. Double height and width character format, as well as text (standard) or data (inverted) mode, can be selected by sending appropriate control codes before printable codes
Connectors Polarised 16-way wrap posts (0.1 pitch) for data lead (supplied)