RS PRO Pressure Reducing Valve, 3/4 in Screwed Iron Female

  • RS Stock No. 761-351
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IT
Product Details

Pressure Reducing Valve - BSP Female

To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second
Suitable for use with water or compressed air
Can be installed in any position and serviced in situ
Single piece acetal resin cartridge
Preset pressure
40°C maximum operating temperature

Note

To facilitate maintenance it is recommended that isolation valves are fitted before and after the pressure reducing valve.
No Gauge port

//media.rs-online.com/t_line/L761351-01.gif
//media.rs-online.com/t_line/LD761351-01.gif
//media.rs-online.com/t_line/LF761351-01.gif
//media.rs-online.com/t_line/LI761351-01.gif
Specifications
Attribute Value
Connection 3/4 in Screwed Iron Female
Minimum Outlet Pressure 1bar
Maximum Outlet Pressure 6bar
Body Material Chrome Plated Brass
Maximum Flow Rate 2L/s
Connection Gender Female
Connection Size 3/4in
Thread Standard or Connection Type Screwed Iron
Outlet Pressure Range 1 → 6bar
17 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR300.02
MYR 299.86
units
Per unit
1 +
MYR299.86
Related Products
Air vents automatically remove air and other incondensable ...
Description:
Air vents automatically remove air and other incondensable gases from steam systems, reducing heat transfer and affecting steam temperature. They improve heat transfer, while saving energy, and maintain process performance where temperature is critical. Their use reduces corrosion and maintenance ...
Type 514 are a new generation of ABS ...
Description:
Type 514 are a new generation of ABS diaphragm valves with solvent cement sockets from GF Piping Systems, It sets new standards regarding safety, efficiency and simplicity.Instead of the commonly used four metal screws it has a central union nut ...
A range of bronze globe valves, individually hydrostatically ...
Description:
A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 barRising StemThreaded bonnetRenewable disc which is suitable for steam serviceBronze trim with glass filled PTFE diskBS21 Taper thread ...
Female screwed type bronze globe valves. These inline ...
Description:
Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. • Rising stem• PTFE renewable disk• High-quality PTFE packing• Body design conditions: PN32• 198°C at 14 bar, 100°C ...