700HTH-1 Pressure Calibrator, For Use With 700 Series Pressure Module

The Fluke 700HTH-1 hydraulic test hose is a 10,000 psi, 690 bar working pressure test hose that features stainless steel and nylon construction for use in connecting a Fluke-700HTP-1 or other hydraulic test pump to a unit under test. The Fluke 700HTH-1 allows connection to both a Fluke pressure module and a calibration unit under test from a Fluke 700HTP-1 hydraulic test pump simultaneously. 700HTH-1 is compatible with water and non-corrosive oil.

Hose and fittings to connect directly to the Fluke 700HTP-1 test pressure port
Self-sealing fittings with easy finger-tight connections
Includes plugs and caps to prevent fluid loss in hose, eliminates the need for hose re-priming
Low volumetric expansion and negligible pressure drop at rated pressures

Materials: Nylon, stainless steel, zinc, plated steel, and nitrile
Minimum Bend Radius: 60 mm
Length: 840mm without adapter fittings
Weight: 413 g

Hose with 2 x 1/4in NPT female output connections, 2 x adapters that to convert 1/4in NPT female to 1/4in NPT male (include sealing caps), 1/4in NPT female to 1/4in BSP male adapter

Pressure Calibration Pumps & Accessories