DIN Rail Mounting Kit for use with DIN Rail Unit

Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): DE
Product Details

Power Transmission Sources, MINI POWER 24 V

MINI POWER

Wide range input for global use
Single-phase, primarily switched
Slim design
Good operational safety due to lengthy mains buffering under full load
Power boost to start difficult loads reliably (power reserve of up to 100%)
Parallel circuit to improve power and redundancy
Wide temperature range = suitable for outdoor installation
Preventive function monitoring through LED signalling and an active switching output for remote diagnosis
Adjustable output voltage
Device connection with double terminal for positive and negative to provide fast potential distribution
Top-hat rail mounting

Rail-Mount Bus Connector ME.17.5

5-pole
Enables the supply of additional modules of the same system with a regulated voltage of 24 Vdc
For housing widths of 17.5 mm
Can only be used in conjunction with the MINI POWER 24 Vdc / 1.5 A
Two rail-mount bus connectors are required per power transmission source
DIN rail assembly

Standards

EN 60950 / VDE 0805 (SELV), EN 61558-2-17, EN 50178 / VDE 0160 (PELV), DIN VDE 0100-410 / DIN VDE 0106-1010

Approvals

CE, UL

Approvals

8888

Specifications
Attribute Value
Series ME 17.5 TBUS 1.5/ 5-ST-3.81 GN
Accessory Type DIN Rail Mounting Kit
For Use With DIN rail unit
5 Within 4 working day(s) (Global stock)
15 Within 4 working day(s) (Global stock)
Price 1 Pack of 2
MYR 106.27
Pack(s)
Per Pack
Per unit*
1 +
MYR106.27
MYR53.135
*price indicative
Related Products
XP Power DIN Rail clip kits are an ...
Description:
XP Power DIN Rail clip kits are an essential accessory for the DTE40-60 Series. The clips are made from a flame retardant, black nylon and include hardware, screws and a drilling template.See typical RS stock numbers 122-6625 (DTE40) & 122-6635 ...
Very short adjustment periodIntegrated sequence function to generate ...
Description:
Very short adjustment periodIntegrated sequence function to generate voltage and current flowsAuto-ranging outputFront and rear output terminalsAddressable RS232 interface / analogue interfaceIEEE488 interface can be integrated as an optionMounting kit 1 for mounting a device in a 19" rackMounting kit ...
Buffering with service free electrolytic capacitors24V or 48V ...
Description:
Buffering with service free electrolytic capacitors24V or 48V models availableConstant output voltage in buffer modeBuffer time 0.2s at 20A (24V) or 0.1s at 20A (48V)Longer hold-up time at lower levelsBuffer units can be connected in parallel to increase the output ...
These industrial power supplies provide laboratory features such ...
Description:
These industrial power supplies provide laboratory features such as 0 to 100% adjustment, read back of V & I, high stability and low ripple making them perfectly suitable for purely automated applications in which no manual controls or meters are ...