Microchip Battery Charger for MCP73871
- RS Stock No.:
- 681-0875
- Mfr. Part No.:
- MCP73871DM-VPCC
- Manufacturer:
- Microchip
Subtotal (1 unit)*
MYR193.34
FREE delivery for orders over RM 500.00
In Stock
- Plus 2 unit(s) shipping from 08 December 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit |
|---|---|
| 1 + | MYR193.34 |
*price indicative
- RS Stock No.:
- 681-0875
- Mfr. Part No.:
- MCP73871DM-VPCC
- Manufacturer:
- Microchip
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Microchip | |
| Power Management Function | Battery Charger | |
| Kit Classification | Evaluation Board | |
| Featured Device | MCP73871 | |
| Select all | ||
|---|---|---|
Brand Microchip | ||
Power Management Function Battery Charger | ||
Kit Classification Evaluation Board | ||
Featured Device MCP73871 | ||
MCP73871 Demonstration Board
The MCP73871 Demo Board with Voltage Proportional Current Control is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing management control.
Integrated System Load Sharing
Input Current Limit Control hardware selected (typical 1650 mA, USB-High
Three LEDs to indicate charge status, low battery and power good signal
Preset Li-Ion battery charge voltage: 4.2V ± 0.5%
Temperature monitoring (is disabled by default)
Factory preset 0.1C preconditioning current of deeply depleted cells
Factory preset Safety Timer with Timer Enable feature
Constant Current/Constant Voltage (CC/CV) charge algorithm
Resistor programmed maximum charge current: 1A
Resistor programmed termination set point: 100 mA
Automatic Charge Termination
Automatic Recharge
Internal Thermal Regulation
Input Current Limit Control hardware selected (typical 1650 mA, USB-High
Three LEDs to indicate charge status, low battery and power good signal
Preset Li-Ion battery charge voltage: 4.2V ± 0.5%
Temperature monitoring (is disabled by default)
Factory preset 0.1C preconditioning current of deeply depleted cells
Factory preset Safety Timer with Timer Enable feature
Constant Current/Constant Voltage (CC/CV) charge algorithm
Resistor programmed maximum charge current: 1A
Resistor programmed termination set point: 100 mA
Automatic Charge Termination
Automatic Recharge
Internal Thermal Regulation
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Battery Management, Microchip