Analog Devices ADP5052-EVALZ LDO Voltage Regulator for ADP5052

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Evaluation Board for ADP5052 Quad Buck Regulators and 200mA LDO Regulator

The Evaluation Board is for the ADP5052, 5-Channel Integrated Power Solution with Quad Buck Regulators and 200mA LDO Regulator.

Wide input voltage range: 4.5V to 15V
±1.5% output accuracy over full temperature range
250kHz to 1.4MHz adjustable switching frequency
Adjustable/fixed output options via factory fuse
Power regulation
Channel 1 and Channel 2: programmable 1.2A/2.5A/4A sync buck regulators with low-side FET driver
Channel 3 and Channel 4: 1.2A sync buck regulators
Channel 5: 200mA Low Drop-Out (LDO) regulator
Always alive 5.1V LDO supply for tiny load demand
Single 8A output (Channel 1 and Channel 2 operated in parallel)
Precision enable with 0.8 V accurate threshold
Active output discharge switch
FPWM or automatic PWM/PSM mode selection
Frequency synchronization input or output
Optional latch-off protection on OVP/OCP failure
Power-good flag on selected channels
Under-Voltage Lock-Out (UVLO), Over-Current Protection (OCP), and Thermal Shut-Down (TSD) protection

Multi-Output Regulators, Analog Devices

Specifications
Attribute Value
Power Management Function LDO Voltage Regulator
Kit Classification Evaluation Board
Featured Device ADP5052
Discontinued product
Related Products
The ISL95338 is a bidirectional, buck-boost voltage regulator ...
Description:
The ISL95338 is a bidirectional, buck-boost voltage regulator that provides buck-boost voltage regulation and protection features. Intersil’s advanced R3™ Technology is used to provide high light-load efficiency, fast transient response, and seamless DCM/CCM transitions. The ISL95338 takes input power from ...
Evaluation board for the NCP161 linear regulator capable ...
Description:
Evaluation board for the NCP161 linear regulator capable of supplying 450 mA output current. Designed to meet the requirements of RF and analogue circuits, the NCP161 device provides low noise, high PSRR, low quiescent current, and very good load/line transients. ...
The NCP160FCT2GEVB evaluation board is designed to quickly ...
Description:
The NCP160FCT2GEVB evaluation board is designed to quickly test the NCP160 which is a linear regulator capable of supplying 250 mA output current designed to meet the requirements of RF and analogue circuits.
Description:
The NCP508 is a 50 mA low noise voltage regulator, designed to exhibit fast turn on time and high ripple rejection. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, resistors for setting output voltage, ...