RS PRO Push-in Push-in
- RS Stock No.:
- 144-2643
- Distrelec Article No.:
- 304-16-964
- Manufacturer:
- RS PRO
Bulk discount available
Subtotal (1 bag of 10 units)*
MYR48.04
Stock information currently inaccessible - Please check back later
Bag(s) | Per Bag | Per Unit* |
|---|---|---|
| 1 - 4 | MYR48.04 | MYR4.804 |
| 5 + | MYR39.52 | MYR3.952 |
*price indicative
- RS Stock No.:
- 144-2643
- Distrelec Article No.:
- 304-16-964
- Manufacturer:
- RS PRO
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | RS PRO | |
| Product Type | Pneumatic Fitting | |
| Sub Type | Reducer | |
| Connection Type A | Push-in | |
| Connection Size A | 6 mm | |
| Connection Type B | Push-in | |
| Connection Size B | 4 mm | |
| Minimum Operating Temperature | 0°C | |
| Material | Plastic | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| Maximum Operating Pressure | 9.7 bar | |
| Food Grade | No | |
| Chemical Resistant | No | |
| Select all | ||
|---|---|---|
Brand RS PRO | ||
Product Type Pneumatic Fitting | ||
Sub Type Reducer | ||
Connection Type A Push-in | ||
Connection Size A 6 mm | ||
Connection Type B Push-in | ||
Connection Size B 4 mm | ||
Minimum Operating Temperature 0°C | ||
Material Plastic | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
Maximum Operating Pressure 9.7 bar | ||
Food Grade No | ||
Chemical Resistant No | ||
- COO (Country of Origin):
- TW
RS PRO Straight Tube-to-Tube Adaptor to Push In 4 mm to Push In 6 mm, 9.9 kgf/cm², 9.7 bar
Connect piping in your pneumatic system with one of these RS PRO straight tube-to-tube adaptors. It's MADE of tough polyoxymethylene (POM) plastic, so it's suitable for heavy-duty applications.
Both ends have a push-in style connection, which makes it easy to install or remove tubing. All you need to do is push a tube into one of the holes. When you're done, just push the sleeve to disconnect it from the fitting.
As part of the RS PRO range, these specialist adaptors have been tested for quality. Adaptors like these are often used inside workshops and repAir shops to connect tubes used in compressed Air cleaning. They're suitable for use with Air only.