IMI Norgren NO Reed Pneumatic Switch, M/50 Series

  • RS Stock No. 363-3316
  • Mfr. Part No. M/50/LSU/2V
  • Manufacturer IMI Norgren
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Norgren Magnetically Operated Reed Switch

The Norgren M/50 series magnetically operated reed switch has switching voltage ranging between 10VDC and 30VDC with 150mA maximum switching current. It has an open collector output with LED and response time of fewer than 1.5 milliseconds.

Features and Benefits

Flush mounted in all the profile cylinders
Operating temperature ranges between -40°C and 80°C
Cable length is 2m
PVC cable

Certifications

IP67 rated
UL approved
CE certified
EN 60947-5-2

Specifications
Attribute Value
Manufacturer Series M/50
Type Reed
Operation NO
LED Indicator Yes
Voltage Rating 170 V dc, 240 V ac
Voltage Drop 2.7V
IP Rating IP66
Maximum Switched Power 10W
Maximum Operating Temperature +80°C
Minimum Operating Temperature -20°C
265 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 134.74
units
Per unit
1 +
MYR134.74
Related Products
The Aventics ST6 series 6mm T-slot reed pneumatic ...
Description:
The Aventics ST6 series 6mm T-slot reed pneumatic sensor works on the normally open operation and has a cable length of 0.3m. It has a yellow LED indicator light to indicate the ON/OFF status. This sensor is compatible with CCI, ...
The SMC D-M9 series M8, 3-pin solid-state reed ...
Description:
The SMC D-M9 series M8, 3-pin solid-state reed switch has a lead wire length of 3m with pre-wired, 500mm long connector. It is a 3-wire connector with PNP output and an in-line electrical entry. This switch has a red LED ...
The Crouzet 81 series pneumatic relay has operating ...
Description:
The Crouzet 81 series pneumatic relay has operating pressure ranging between 2bar and 8bar with 2-hand control. This pneumatic 2-hand control device is used with dangerous machinery and requires simultaneous use of both hands to trigger and maintain machine operation. ...
The SMC D-C series auto-switch has a load ...
Description:
The SMC D-C series auto-switch has a load voltage of 24VDC or 100VAC with a maximum load current of 40mADC or 20mAAC. It has an internal drop voltage of 2.4VDC with a red LED indicator light.Note:Please refer to the manufacturer's ...