Mitsubishi FX2N Series Counting Module for Use with MELSEC FX2N Series, Encoder, Transistor, 5 → 24 V dc
- RS Stock No.:
- 320-9171
- Mfr. Part No.:
- FX2N-1HC
- Manufacturer:
- Mitsubishi
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 320-9171
- Mfr. Part No.:
- FX2N-1HC
- Manufacturer:
- Mitsubishi
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- JP
Product Details
High Speed Counter Module for FX2N PLC
This offers an ideal means of interfacing a shaft encoder to an FX2N PLC. It counts 1 or 2 phase (A/B) inputs up to 50kHz and has two 0.5A, 5 to 24Vdc NPN open collector transistor outputs which are controlled independently from the main program cycle. Counting can be enabled or reset by the PLC or external inputs, as can count direction (up/down). The module is powered by the base unit.
Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's
Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.
All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.
Specifications
Attribute | Value |
|---|---|
| Accessory Type | Counter |
| Series | FX2N |
| Number of Inputs | 8 |
| Input Type | Encoder |
| Output Type | Transistor |
| Number of Outputs | 2 |
| For Use With | MELSEC FX2N Series |
| Supply Voltage | 5 → 24 V dc |
| Output Current | 500 mA |
| Dimensions | 90 x 55 x 87 mm |