Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	onsemi
	Mounting Type	Surface Mount
	Package Type	TSSOP
	Pin Count	20
	Dimensions	6.6 x 4.5 x 1.05mm
	Length	6.6mm
	Width	4.5mm
	Height	1.05mm
	Maximum Operating Supply Voltage	5.5 V
	Maximum Operating Temperature	+125 °C
	Minimum Operating Supply Voltage	2.7 V
	Minimum Operating Temperature	-25 °C

	Select all
	Brand onsemi
	Mounting Type Surface Mount
	Package Type TSSOP
	Pin Count 20
	Dimensions 6.6 x 4.5 x 1.05mm
	Length 6.6mm
	Width 4.5mm
	Height 1.05mm
	Maximum Operating Supply Voltage 5.5 V
	Maximum Operating Temperature +125 °C
	Minimum Operating Supply Voltage 2.7 V
	Minimum Operating Temperature -25 °C

Datasheet NCN6001DTBR2G

The NCN6001 is an integrated circuit dedicated to the smart card interface applications. The device handles any type of smart card through a simple and flexible micro controller interface. On top of that, thanks to the built in chip select pin, several couplers can be connected in parallel.The device is particularly suited for low cost, low power applications,with high extended battery life coming from extremely low quiescent current.

Wide battery supply voltage range : 2.7 < Vcc < 5.5V
Programmable CRD_VCC supply handles 1.8V, 3V or 5V card operation.
Programmable rise and fall card clock slopes
Programmable card clock divider
Built-in Chip Select logic allows parallel coupling operation
ESD protection on card pins ( 8 kV, Human Body Model )
Supports up to 40 MHz input Clock
Built-in programmable CRD_CLK stop function handles Run or Low state.
Programmable CRD_CLK slopes to cope with wide operating frequency range
Fast CRD_VCC turn-on & turn-off sequence
End Products
POS / ATM
Pay TV
Applications
E-commerce interface

NCN6001DTBR2G, Smart Card Interface 20-Pin TSSOP

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.