LeCroy ZD200 Oscilloscope Probe, Probe Type: Active, Differential 200MHz 60V

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

Teledyne LeCroy ZD Series Active Differential Probes

Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes) differential probes measure the difference in voltage of a test point in relation to another test point. High bandwidth, excellent common-mode rejection ratio (CMRR) and low noise make LeCroy ZD Series differential probes ideal for applications such as automotive development and failure analysis, together with wireless and data communication design. With its ProBus interface, the ZD Series probe becomes an integral part of the oscilloscope. Probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required. Teledyne LeCroy also offers PK111 ( 7898337 ) which is a replacement accessory kit for ZD500, ZD1000 & ZD1500.

Applications:

CMRR (typical) 80dB @ 60 Hz (ZD200), 60dB @ 50/60 Hz (ZD500, ZD1000, ZD1500)

Supplied with

Adapted probe leads and tips, instruction manual, certificate of calibration

LeCroy oscilloscope probes

The LeCroy oscilloscope probe offers a wide dynamic range of ±20V and a common-mode range of ±60V to allow a broad application use. The probe sensitivity and offset are automatically optimized based on the oscilloscope gain settings, so control is transparent to the user. When used with a LeCroy digital oscilloscope, no external power supply is required. Differential probes measure the difference in voltage of a test point with another test point.Supplied with: Adapted probe leads and tips Instruction manual Certificate of calibrationSupplied with: Y lead set 6x straight tip 2x hook clip 2x micro IC clips 2x Micrograbber 2x extension lead (5cm) 2x extension lead (10cm) 2x dual-pin set (12.8mm) 2x dual-pin set (16.8mm) Instruction manual Certificate of calibration

Features and Benefits

Bandwidth is DC to 200MHz Attenuation ratio is 1:1 Input impedance is 1Mohmll 3.5pF Input differential range ±20V Common Mode Range is ±60V CMRR (typical) is 80dB at 60Hz and 50dB at 10MHz It provide the best signal fidelity and minimize peaking and other undesirable effects often introduced with probe tips and leads Complete accessory kit consisting of 3 seta of grabbers, one alligator clip, 2 sets of leads and 2 tip option for probing a variety of test points Risetime 10–90% (Typical): 1.75ns

Applications

Automotive development Failure analysis

Supplied with:

Adapted probe leads and tips Instruction manual Certificate of calibration Y lead set 6x straight tip 2x hook clip 2x micro IC clips 2x Micrograbber 2x extension lead (5cm) 2x extension lead (10cm) 2x dual-pin set (12.8mm) 2x dual-pin set (16.8mm)

Supplied with

Y leadset, 6x straight tip, 2x hook clip, 2x micro IC clips, 2x micrograbber, 2x extension lead (5cm), 2x extension lead (10cm), 2x dual pin set (12.8mm), 2x dual pin set (16.8mm), instruction manual, certificate of calibration

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:1
Bandwidth 200MHz
Maximum Common Mode Input Voltage 60V
Model Number p ZD200
Series ZD
Rise Time 1.75ns
1 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 10,524.10
units
Per unit
1 +
MYR10,524.10
Related Products
An indispensable accessory for analogue or digital oscilloscopes ...
Description:
An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground!A range of three models to fulfil different requirements.1 or 2 input channels.Coaxial or banana measuring leads/long length banana leads.A model with coaxial ...
An indispensable accessory for analogue or digital oscilloscopes ...
Description:
An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground!A range of three models to fulfil different requirements.1 or 2 input channels.Coaxial or banana measuring leads/long length banana leads.A model with coaxial ...
Rated voltage of probe:. Highly flexible 1.2m coaxial ...
Description:
Rated voltage of probe:. Highly flexible 1.2m coaxial cable with BNC plugCompensation adjusting screwø 2 mm safety socket for reference connectionIsoprobe® II 10:1 150MHz probe.
A range of high performance miniature passive probes ...
Description:
A range of high performance miniature passive probes with BNC connector or 4 mm plugs to suit several instrumants. All probes are equipped with spring loaded needle sharp tips. Two sizes of spring tip are available along with a solid ...