Keysight Technologies N2876A Oscilloscope Probe, Probe Type: Passive 1.5GHz 1:100

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Keysight N2870A Series Passive Probes and Accessories

Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip is also spring loaded, keeping it from slipping off the device being probed. To minimize the inductive effects that cause ringing of high speed signals, the innovative ground blade or spring ground connection can be used. Adhesive copper pads provided with the probe can be attached on top of an IC and connected to its ground pins to create a convenient ground plane for the probe to connect to. When used with the ground blade this method provides an ideal ground connection for probing signals with high frequency contents. The IC cap fits over the probe tip, providing a convenient self-aligning connection to fine-pitch IC pins.

Weight (probe only) 48g
Cable length 1.3m
Operating temperature 0 °C to +50°C
Non-operating temperature -40 °C to +70°C
Operating altitude 2000 m (6,561ft)
Non-operating altitude 15,000m (49,212 ft)
Operating humidity 80% room humidity for temperatures up to 31 °C, decreasing linearly to 40% at 50°C
Pollution degree 2


Probe ID readout: compatible with Agilent's InfiniiVision and Infiniium series oscilloscopes

Supplied with

1 spring-loaded probe tip, 4 spare probe tips (2 spring-loaded and 2 rigid) and 5 different IC caps for IC lead pitches from 0.5mm to 1.27mm

Passive Oscilloscope Probes


All the products in this range are supplied for use with instruments with a permanent earth connection.

Attribute Value
Probe Type Passive
Attenuation 1:100
Bandwidth 1.5GHz
Connector Type BNC
Model Number p N2876A
Safety Category Level CAT I
Safety Category Voltage 21V
Series N2870A
Safety Category CAT I 21 V
2 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR2,739.46
MYR 2,546.59
Per unit
1 +
Related Products
The N2784A single arm probe positioner (134-6160) and ...
The N2784A single arm probe positioner (134-6160) and N2785A 2-arm probe positioner (134-6162) provide quick and stable X-Y positioning with only a “lift and drop” motion to put the probe in place for PC boards and devices that require hands-free ...
Pico TA051 feed-through attenuator is a coaxial terminator ...
Pico TA051 feed-through attenuator is a coaxial terminator with BNC connectors. It is useful for connecting signals from 50Ω sources into instruments with 1MΩ impedance inputs, such as oscilloscopes. Bandwidth DC to 1GHzMaximum power dissipation 1WInput impedance 50ΩResistance tolerance ±2%Dimensions ...
The Rohde & Schwarz RT-ZD 4.5GHz differential broadband ...
The Rohde & Schwarz RT-ZD 4.5GHz differential broadband probes has a flat frequency response and a high input impedance with low input capacitance permit precise measurements on differential signals while keeping the loading on the DUT low. High common mode ...
The Tektronix single-ended Active FET oscilloscope probe provides ...
The Tektronix single-ended Active FET oscilloscope probe provides excellent high-speed electrical and mechanical performance required for digital system designs. It is specifically designed for direct connection to oscilloscopes with the TekVP probe interface.Note:TAP1500 includes individual probe caseSupplied ...