Phoenix Contact Optocoupler, Max. Forward 24 V, Max. Input 6 mA, 80mm Length, DIN Rail Mounting Style

Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): DE
Product Details

dc/dc, dc/ac & ac/dc Opto-Couplers

These DIN rail mount opto-couplers provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment by electrically isolating its inputs, outputs, or both. The dc/ac and ac/dc versions also provide a means of interfacing (whilst isolating) ac and dc control voltages.

Features and Benefits

dc in/dc out, dc in/ac out and ac in/dc out versions available
Versions with switching speeds up to 100kHz available
2.5kVac input to output isolation
LED status indication
Module width 6.2mm
Operating temperature range: -20 to +60°C


IEC 60 664, IEC 60 664A, DIN VDE 0110


An Input solid-state relay for DIN rail mounting, with yellow LED display and includes signal inputs on PLC counter boards.

Features and Benefits

• Reverse polarity and surge protection
• Screw connection
• Capacitor on the input side for interference suppression
• M3 thread


Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavourable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.

Attribute Value
Maximum Forward Voltage 24 V
Maximum Input Current 6 mA
Isolation Voltage 2.5kV
Mounting Style DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Length 80mm
Width 6.2mm
Depth 56mm
Operating Temperature Range -20 → +60 °C
Dimensions 56 x 80 x 6.2 mm
Series DEK-OE- 24DC/24DC/100KHZ
67 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR538.05
MYR 442.86
Per unit
1 +
Related Products
EMG-OV power opto couplers are used as the ...
EMG-OV power opto couplers are used as the modular interface in all industrial fields for signal amplification to 230V / 3A and for electrical isolation.Input and output end suppressors, integrated operating display and a 3.5 kV test voltage ensure maximum ...
The SIRIUS 3TX7 narrow design interface relays are ...
The SIRIUS 3TX7 narrow design interface relays are coupling elements used to connect control signals to and from a PLC. Coupling device (interface) as a connector moduleControl and peripheral motor protectionEquipment: DIN VDE 0110, DIN VDE 0435, DIN VDE 0660 ...
Converts a 0-10Vdc input signal into a pulse ...
Converts a 0-10Vdc input signal into a pulse width modulated output to control the output using variable on-off ratios. This could be used, for example, in closed loop temperature controllers.
In order to fit voltage/current together with galvanic ...
In order to fit voltage/current together with galvanic insulation, interface is necessary through devices providing these functions plus transmission of input/output logic signals.,The R600 range of relays and optocouplers makes it possible. These devices provide many voltage and current adjustments ...