OPA140AIDBVT Texas Instruments, Op Amps, 11MHz, 36 V, 5-Pin SOT-23

The OPA140, OPA2140, and OPA4140 (OPAx140) operational amplifier (op amp) family is a series of low-power JFET input amplifiers that features good drift and low input bias current. The rail-to-rail output swing and input range that includes V– allow designers to take advantage of the low-noise characteristics of JFET amplifiers while also interfacing to modern, single-supply, precision analog-to-digital converters (ADCs) and digital-to-analog converters (DACs).

The OPA140 achieves 11-MHz unity-gain bandwidth and 20-V/μs slew rate while consuming only 1.8 mA (typical) of quiescent current. This device runs on a single 4.5-V to 36-V supply or dual ±2.25-V to ±18-V supplies.

All versions are fully specified from –40°C to +125°C for use in the most challenging environments. The OPA140 (single) is available in the 5‑pin SOT-23 8‑pin VSSOP and 8‑pin SOIC packages. The OPA2140 (dual) is available in 8‑pin SON, 8‑pin VSSOP, and 8‑pin SOIC packages. The OPA4140 (quad) is available in the 14‑pin SOIC and 14‑pin TSSOP packages.

Very-low offset drift: 1 μV/°C maximum
Very-low offset: 120 μV
Low input bias current: 10 pA maximum
Very-low 1/f noise: 250 nV PP, 0.1 Hz to 10 Hz
Low noise: 5.1 nV/√ Hz
Slew rate: 20 V/μs
Low supply current: 2 mA maximum
Input voltage range includes V– supply
Single-supply operation: 4.5 V to 36 V
Dual-supply operation: ±2.25 V to ±18 V
No phase reversal

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.