Pilz Magnetic Non-Contact Safety Switch, 24V dc, Plastic Housing, NO/NC, M8

The PSENmag Non-contact Switch meets the highest safety requirements offers a complete solution that is safe and economical. It is approved up to PLe of EN ISO 13849-1, SIL 3 of EN/IEC 62061 and Category 4 of EN 954-1.

Connected via a plug connection or with cable
Flexible cable outlet, including connector, so there is no need for an angled connector
Flexible mounting, both the sensor and the actuator support every conceivable mounting configuration
Cost effective thanks to series connection
Operating distance of 3 mm or 10 mm
Extra signal contact and LED

The PSENmag safety switch is suitable for use in applications with heavy soiling, thanks to its non-contact design.

Only stock nos. 744-8702 and 824-4918 have an LED.

EN954-1 (Cat 4), EN60204-1, EN60947-5-3.

CE, cULus Listed, TÜV.

Actuator.

EN60947-5-3 standard is only met if entire system consisting of safety switch (PSENmag), actuator (PSENmag) and a safety monitoring module (PNOZ X) is used.

BG, cUL, CCC