Eaton Paralleling Link for use with DILM15 Series, DILM32 Series

  • RS Stock No. 493-0725
  • Mfr. Part No. DILM32-XP1
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Paralleling Links

Used to convert a 3 pole contactor to a single pole contactor, thereby increasing the current capacity threefold, e.g. 3 pole 9A contactor becomes a single pole 27A contactor
493-0719 for use with contactor DILM7 to DILM12
493-0725 for use with contactor DILM17 to DILM32

Specifications
Attribute Value
Accessory Type Paralleling Link
For Use With DILM15 Series, DILM32 Series
Series DILM
5 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 66.83
units
Per unit
1 - 4
MYR66.83
5 +
MYR64.98
Related Products
Enclosure rated at IP55Stop button can be fitted ...
Description:
Enclosure rated at IP55Stop button can be fitted to the front of the enclosureUse ’connector’ to connect manual motor starters to the contactorsAdapter plate has 3 pole connection for mounting of a GV2 and an LC1 D09 to D25 contactor. ...
Professional range of Eaton Memshield miniature circuit breakers. ...
Description:
Professional range of Eaton Memshield miniature circuit breakers. The MCBs are designed to deliver safe, reliable and high performance protection on electrical power distribution systems. Complies with BS EN 60898Accept cable up to 25mm²Thermal/magnetic operationPositive contact indication (red-on, green-off)1 or ...
Highly conductive auxiliary contacts with four contact pointsQuick ...
Description:
Highly conductive auxiliary contacts with four contact pointsQuick connect - snap on accessory mountingDistinct contact status indicationUp to four auxiliary contacts can be mountedMechanical interlock only 5mm deepPositive (force) guided contacts (mechanically-linked per IEC)three-pole contactors, 9 to 110A IEC ...
The connection busbars ensure correct installation of all ...
Description:
The connection busbars ensure correct installation of all "Prodis compatible" systems; DT 40 (1P+N and 3P+N), TL, CT, ITG 40, CM, etc.The busbars can be cut using a saw.