Schneider Electric Current Monitoring Relay, 1 Phase, DPDT, DIN Rail

Schneider Electric RM35 JA current control relay for controlling alternating and direct currents in the event of under or overcurrent. Automatic alternating or direct current recognition and a wide measurement range. Monitors heating and lighting circuits and motor and generator load status.

Checks its own power supply
Clear hinged front cover
LED display of output status
DIN Rail mounting

NF EN 60255-6 and IEC 60255-6

UL, CSA, GL, C-Tick, GOST

• Commonly referred to by the relays short name RM35JA
• Forms part of the Zelio range of products
• Features a switching capacity of 1250 VA
• Has a minimum switching current of 10 mA at 5 V DC and a maximum switching current of.5 VA AC
• Time delay - Adjustable 1...20 s, 0 + 10 % on energisation Ti and adjustable 0.3...30 s, 0 + 10 % on crossing the threshold Tt
• Reset time of 1500 ms time delay
• Electrically durable up to 100000 cycles and mechanically durable up to 30000000
• Has an ingress protection rating of - IP20 (terminals) and IP30 (casing)
• This monitoring relay is 35 mm in width

Schneider Electric Voltage, Current, Phase & Motor Protection