Littelfuse C-III Series Metal Oxide Varistor, Clamping 340V, Varistor 225.5V

  • RS Stock No. 876-7990
  • Mfr. Part No. V130LA10CP
  • Manufacturer Littelfuse
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Littelfuse Metal Oxide Varistors - LA / MA / ZA Series

Littelfuse metal oxide varistors are compact and versatile, and can be used within a wide range of applications.

The LA series of MOV’s are radial-lead varistors that are designed to be operated continuously across AC power lines.

The MA series of MOV’s are axial-lead varistors that are designed for use in a wide variety of board level industrial and commercial electronic equipment, protecting components and signal/data lines from low energy transients.

The ZA series of MOV’s are radial-lead varistors that are designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include motor control, telecom, automotive systems, solenoid, and power supply circuits to protect circuit board components and maintain data integrity.

Specifications
Attribute Value
Varistor Voltage 225.5V
Maximum AC Voltage Rating 130V
Clamping Voltage 340V
Series C-III
Maximum Surge Current 6500A
Dimensions 17 (Dia.) x 20.5mm
Lead Pitch 8.5mm
Temporarily out of stock - back order for despatch 31/12/2019, delivery within 4 working days from despatch date
Price Each (In a Pack of 50)
MYR 2.834
units
Per unit
Per Pack*
50 +
MYR2.834
MYR141.70
*price indicative
Related Products
High power metal oxide varistors suitable for reducing ...
Description:
High power metal oxide varistors suitable for reducing transient voltage spikes in industrial power applications. Single and two-hole fixing types for distribution bus-bar mountingInsulated plastic case types for flat surface mountingHigh-mass large-diameter zinc oxide elementRepeatable protection against ...
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned ...
Description:
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned copper wire leads with a ceramic body coated with epoxy resinRated for surge current (8//20 μs) and for energy (2ms).
Almost no energy consumption in stand-by modeAfter a ...
Description:
Almost no energy consumption in stand-by modeAfter a surge impulse the varistor works immediately in normal mode so there is no slip currentExcellent absorption at surge impulsesOperating temperature:–40 ºC to +85 ºC for types up to 95 VRMS–40 ºC to ...
After a surge impulse the varistors works immediately ...
Description:
After a surge impulse the varistors works immediately in normal mode so there is no slip current Excellent absorption Operating temperature: -40 °C → +85 °C for the sizes 0402 to 0805,-40 °C → +125 °C for the sizes 1206 ...