Littelfuse ZA Series Metal Oxide Varistor 75pF 5A, Clamping 710V, Varistor 387 → 495V

  • RS Stock No. 760-7024
  • Mfr. Part No. V430ZA05P
  • Manufacturer Littelfuse
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Littelfuse Metal Oxide Varistors - LA / MA / ZA Series

Littelfuse metal oxide varistors are compact and versatile, and can be used within a wide range of applications.

The LA series of MOV’s are radial-lead varistors that are designed to be operated continuously across AC power lines.

The MA series of MOV’s are axial-lead varistors that are designed for use in a wide variety of board level industrial and commercial electronic equipment, protecting components and signal/data lines from low energy transients.

The ZA series of MOV’s are radial-lead varistors that are designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include motor control, telecom, automotive systems, solenoid, and power supply circuits to protect circuit board components and maintain data integrity.

Specifications
Attribute Value
Varistor Voltage 387 → 495V
Maximum AC Voltage Rating 275V
Maximum DC Voltage Rating 369V
Clamping Voltage 710V
Clamping Current 5A
Energy 11J
Series ZA
Diameter 7mm
Maximum Surge Current 400A
Capacitance 75pF
Thickness 5.6mm
Dimensions 7 (Dia.) x 5.6mm
Lead Pitch 6mm
800 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 25)
MYR 0.39
units
Per unit
Per Pack*
25 - 100
MYR0.39
MYR9.75
125 - 225
MYR0.376
MYR9.40
250 - 600
MYR0.358
MYR8.95
625 - 1225
MYR0.34
MYR8.50
1250 +
MYR0.319
MYR7.975
*price indicative
Related Products
High power metal oxide varistors suitable for reducing ...
Description:
High power metal oxide varistors suitable for reducing transient voltage spikes in industrial power applications. Single and two-hole fixing types for distribution bus-bar mountingInsulated plastic case types for flat surface mountingHigh-mass large-diameter zinc oxide elementRepeatable protection against ...
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned ...
Description:
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned copper wire leads with a ceramic body coated with epoxy resinRated for surge current (8//20 μs) and for energy (2ms).
Almost no energy consumption in stand-by modeAfter a ...
Description:
Almost no energy consumption in stand-by modeAfter a surge impulse the varistor works immediately in normal mode so there is no slip currentExcellent absorption at surge impulsesOperating temperature:–40 ºC to +85 ºC for types up to 95 VRMS–40 ºC to ...
Higher voltage rating and transient energy rating than ...
Description:
Higher voltage rating and transient energy rating than typical multi-layer ceramic varistorsProven Zinc Oxide formulationTop and bottom surfaces glass coatedRadial MOV replacementDimensions (mm) : 8.5x5x2.