Recently searched

    RawlPlug Steel Masonry Anchor M6 x 83mm, 12mm fixing hole

    RS Stock No.:
    528-227
    Mfr. Part No.:
    R-RBL-06EW
    Manufacturer:
    RawlPlug
    RawlPlug
    View all Masonry Bolts & Anchors
    40 In Global stock for delivery within 4 - 6 working days
    Add to Basket
    units

    Added

    Price Each (In a Pack of 10)

    Was MYR37.956

    You pay

    MYR30.365

    unitsPer UnitPer Pack*
    10 +MYR30.365MYR303.65
    *price indicative
    RS Stock No.:
    528-227
    Mfr. Part No.:
    R-RBL-06EW
    Manufacturer:
    RawlPlug

    RoHS Status: Not Applicable

    COO (Country of Origin):
    GB

    Legislation and Compliance

    RoHS Status: Not Applicable

    COO (Country of Origin):
    GB

    Product Details

    Rawlbolts™ - Hook & Eye


    Heavy-duty hook and eye type Rawlbolt™ anchors, suitable for a variety of applications.

    Features and Benefits.


    Steel hook or forged steel eye removable from cast anchor shield Bright zinc plated for corrosion protection
    Typical applications include chain barriers, lighting fixtures, suspended ceilings, guy ropes and stays

    Typical Shield Anchor Eye Bolt Fixings Applications.


    • Supporting ladder restraints.

    • Supporting Guy ropes, stays and cables.

    Material the R-RBL-E Rawlbolt Eye Bolts are Compatible with?


    Approved for use in:

    • Cracked concrete C20/25-C50/60.

    • Non-Cracked concrete C20/25-C50/60.

    • Unreinforced concrete.

    • Reinforced concrete.

    • Solid clay brick ≥ 20MPa.

    • Hollow lightweight concrete block LAC 5 ≥ 5MPa.

    • Hollow sand lime brick ≥ 15MPa.

    • Hollow core slab C20/25.

    • Hollow core slab C30/37-C50/60.

    R-RBL-E Rawlbolt Expansion Eye and Hook Bolts Fixings Available?


    • Stock number 528227, M6, Shield anchor Eye Bolt, 12 mm x 83 mm.

    • Stock number 528205, M6, Shield anchor Hook Bolt, 12 mm x 83 mm.

    • Stock number 528233, M8, Shield anchor Eye Bolt, 14 mm x 98 mm.

    • Stock number 528211, M8, Shield anchor Hook Bolt, 14 mm x 98 mm.

    • Stock number 6816738, M10, Shield anchor Eye Bolt, 16 mm x 120 mm.

    • Stock number 6816735, M10, Shield anchor Hook Bolt, 16 mm x 120 mm.

    • Stock number 6816731, M12, Shield anchor Eye Bolt, 20 mm x 145 mm.

    • Stock number 6816744, M12, Shield anchor Hook Bolt, 20 mm x 145 mm.

    How to use the R-RBL-E Rawlbolt Expansion Eye Bolts?


    • Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.

    • Special note: If fixing into brickwork avoid all mortar joint areas.

    • Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blowpump).

    • Insert the anchor into the pre-drilled hole till it is flush with the surface then position the eye as required.

    • Tighten the fixing carefully, only to the recommended torque using the Hex but and not the eye.


    Specifications

    AttributeValue
    Thread SizeM6
    TypeShield Anchor Eye Bolt
    Length83mm
    Fixing Hole Diameter12mm
    MaterialSteel
    Eye Inside Diameter10mm
    40 In Global stock for delivery within 4 - 6 working days
    Add to Basket
    units

    Added

    Price Each (In a Pack of 10)

    Was MYR37.956

    You pay

    MYR30.365

    unitsPer UnitPer Pack*
    10 +MYR30.365MYR303.65
    *price indicative