Legris Manual Ball Valve Brass 1/2 in G 2 Way
- RS Stock No. 283-0178
- Mfr. Part No. 0432 13 21
- Manufacturer Legris
In-Line Valves
Valve lockable in open or closed position
When plate fixed to valve body and plate attached to valve stem are padlocked together, valve handle cannot be operated
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
| Attribute | Value |
|---|---|
| Attachment Type | Threaded |
| Threaded Connection | 1/2 in G |
| Body Material | Brass |
| Thread Size | 1/2in |
| Safe for Use With | Water |
| Maximum Working Pressure | 40 bar |
| Connection Size mm | 15mm |
| Connection Size inch | 1/2in |
| Type | 2 Way |
