RS PRO Constant Voltage LED Driver 10W 12V 820mA

  • RS Stock No. 669-7206
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

LED Replacement for 12V Dichroic Lamps

Suitable as a direct energy saving alternative to 12V MR16 halogen dichroic lamps
Comparable light output to higher wattage halogen lamps making them suitable for general lighting, lift cars, hotels and bars as well as accent and highlighting effects
Wide beam angle (60°) for a good even spread of light
Long lamp life with very few early failures (if run on the dedicated transformer) making it suitable for difficult to reach locations
Available colour outputs: pure white (5300K) to blend in with other halogen lamps or warm white (2950K) which provides an eye-pleasing light quality similar to tungsten incandescent lamps
Very cool beam and low heat generation reduces air conditioning requirements
Attractive nickel plated diecast housing
LED driver (Stock Number 669-7206) is suitable for use within a luminaire, enclosure or free standing (within ceiling space etc.) and can drive multiple lamps (max. 10 W)

Note

It is strongly recommended that these lamps are run with the dedicated LED driver. In some instances the lamps may run correctly with existing power supplies, but it is important to ensure that the required minimum wattage is reached. Use with the dedicated LED drivers is recommended for greatest longevity, compatibility and to avoid lamp flicker or strobing.
The 5W lamps will protrude from most fittings and are therefore unsuitable for enclosed fittings. Lamp life may be reduced if installed in sealed fittings. 3 year warranty valid only when these LED lamps are operated with the dedicated LED driver.

Specifications
Attribute Value
Input Voltage 220 → 240 V ac
Output Voltage 12V
Operation Constant Voltage
Output Current 820mA
Maximum Output Power 10W
AC or DC Input Voltage Ac
Current Rating 820mA
Output DC
Voltage Rating 230 V, 230 V ac
Standards Met DIN VDE0710-T14, EN 55015, EN 61000-3-2, EN 61347-1, EN 61347-2-13, EN 61547, EN 62384
116 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 86.36
units
Per unit
1 +
MYR86.36
Related Products
Convenio is a range of products that create ...
Description:
Convenio is a range of products that create a modular lighting system covering most of spot, linear and area lighting applicationsUnified electrical and mechanical interface allows the customer to create a variety of lighting schemesContemporary and minimalist ultra slim designSeamless ...
The UVC25TD series from PowerLED are 25 W ...
Description:
The UVC25TD series from PowerLED are 25 W constant voltage LED drivers featuring Triac dimming. UVC25TD LED drivers also offer short circuit, overcurrent and over-voltage protection. Push terminals provide easy installation into your chosen application. Features and BenefitsConstant currentTriac dimmingFully ...
External switch mode IP67 rated power suppliesHigh efficiency, ...
Description:
External switch mode IP67 rated power suppliesHigh efficiency, long life and high reliabilityDesigned for indoor or outdoor installationsSuitable for LED lighting and moving sign applicationsFully regulated outputShort circuit, over-load, over-voltage and over-temperature protectionConstant current level ...
Fully isolated plastic case switch mode power suppliesSuitable ...
Description:
Fully isolated plastic case switch mode power suppliesSuitable for LED lighting and moving sign applicationsBuilt-in active PFC functionShort circuit/Over load/Over voltage/Over temperature protectionHigh efficiency, long life and high reliabilityAdjustable output voltage and current levelBuilt-in constant current ...