ACPL-C87B-000E Broadcom, Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP

  • RS Stock No. 922-6769
  • Mfr. Part No. ACPL-C87B-000E
  • Manufacturer Broadcom
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Isolating Amplifiers, Avago Technologies

The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.

Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers

Specifications
Attribute Value
Power Supply Type Single
Typical Single Supply Voltage 4.5 → 5.5 V
Isolation Mode Rejection -78dB
Number of Channels per Chip 1
Maximum Voltage Gain 1.005V/V
Mounting Type Surface Mount
Package Type SSOP
Pin Count 8
Dimensions 5.85 x 6.807 x 3.18mm
Height 3.18mm
Width 6.807mm
Length 5.85mm
Maximum Operating Temperature +105 °C
Minimum Operating Temperature -40 °C
2400 Within 4 working day(s) (Global stock)
42 Within 6 working day(s) (Global stock)
Price Each (In a Tube of 80)
MYR 25.022
units
Per unit
Per Tube*
80 - 80
MYR25.022
MYR2,001.76
160 - 240
MYR24.768
MYR1,981.44
320 - 720
MYR24.217
MYR1,937.36
800 - 1520
MYR23.803
MYR1,904.24
1600 +
MYR23.382
MYR1,870.56
*price indicative
Related Products
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
Thermocouple-to-Digital ConverterIntegrated Cold-Junction CompensationThermocouple Types: K-, J-, N-, ...
Description:
Thermocouple-to-Digital ConverterIntegrated Cold-Junction CompensationThermocouple Types: K-, J-, N-, T-, S-, R-, and E-Type0.25°C ResolutionDetects Thermocouple Shorts to GND or VCCDetects Open ThermocoupleInterfaces with simple SPI-Compatible Serial Interface (Read-Only) to Microcontrollers.
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...